View Single Post
  #47  
Old 10-25-2020, 11:22 PM
Doug Young's Avatar
Doug Young Doug Young is offline
Charter Member
 
Join Date: Apr 2005
Location: Mountain View, CA
Posts: 7,827
Default

Quote:
Originally Posted by loco gringo View Post
Doug, is this the mic you are using?

https://www.bartlettaudio.com/produc...hantom-powered
I have this one:

https://www.bartlettaudio.com/collec...attery-powered

But I cut the cord and installed it as an internal mic, so it's just powered by the 9 volts to the ring, supplied by the MS-2. As provided by Bartlett they have a simple passive circuit included that I think cuts the bass response a little bit, so I lost that with my install. I had the high pass filter turned basically all the way up as a result, the mic's a bit bassy, at least in this guitar. With the Audix mic I usually use, I don't have to have as much bass cut.

The Bartlett's a nice sounding mic, but I'm not sure I'd recommend doing what I did with it, the Audix or DPA 4061 are probably better choices for an internal mic.
Reply With Quote