View Single Post
  #3  
Old 02-21-2018, 03:44 PM
jonfields45 jonfields45 is offline
Registered User
 
Join Date: Jun 2011
Location: Allentown, PA
Posts: 4,598
Default

I've installed K&K's and MiSi Trio's (Baggs Element UST) in different RainSongs over the years with no particular issues to report. I have a StewMac endpin reamer which I use after drilling out the endpin hole a bit, but I imagine drilling directly to the final dimension would also work well.

I am a little concerned about mounting a K&K directly on CF as the removal technique using a razor blade is not going to work on something not as smooth as a maple bridge plate. However for the CO-DR1100N2 I put a K&K in, I just went for it. To do it again, I might put a little sacrificial veneer between the disks and the top such that a future uninstall might be easier.
__________________
jf45ir Free DIY Acoustic Guitar IR Generator
.wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below
I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs
IR Demo, read the description too: https://youtu.be/SELEE4yugjE
My duo's website and my email... [email protected]

Jon Fields
Reply With Quote