More work on the neck. For the head plate, the decision was to match the top and go with spruce. Not a typical decision.
IMG_1609000106.522783.jpg
The cut out for the truss rod adjustment
IMG_1609000165.624816.jpg
Head plate glued on. The neck is reinforced with carbon fibre before the truss rod is placed.
IMG_1609000294.053390.jpg
The fretboard glued to the neck is of Rocklite and is a mild multiscale 25.5”-25”. Nut is going to be 1 3/4”
IMG_1609000461.167559.jpg
The neck carve is going to be slightly asymmetric. More of a fuller C shape closer to the treble strings, and a flatter V shape towards the top.
IMG_1609000489.915095.jpg