View Single Post
  #47  
Old 11-18-2020, 07:18 PM
iim7V7IM7's Avatar
iim7V7IM7 iim7V7IM7 is offline
Charter Member
 
Join Date: Feb 2012
Location: An Exit Off the Turnpike in New Jersey
Posts: 4,385
Default Rosette

Mark worked on part of the rosette today.

In the first shot you can see that Mark cut 10-36 degree trapezoid pieces of Brazilian Rosewood cut from a piece similar to the headstock veneer shown in the same shot. The grain of the rosewood is radially arrayed when assembled and contrasting color is organized to create light against dark for visual interest. The piece are located on a backer.



The glued Brazilian Rosewood pieces adhered onto backer are cut out into a 0.240 wide circular rosette ring.



Here is the Brazilian Rosewood rosette ring glued up with surrounding 0.040 curly Koa purflings with 0.020 Black Fiber in a UHMW polyethylene mold.

__________________
Flattops by:
Bashkin | Blanchard | Brondel | Buscarino | Chasson | Franklin | Klepper | Sexauer
Reply With Quote