View Single Post
  #4  
Old 01-19-2015, 11:34 AM
OddManOut's Avatar
OddManOut OddManOut is offline
Charter Member
 
Join Date: Feb 2009
Location: Carson City, Nv (Want a jackrabbit? We've got extras!)
Posts: 3,057
Default Joining Plates/Bending Sides/Neck Blank

I just received a batch of pics from Larry. There are multiple posts below.

Firstly, I went with no center strip on the back. I decided to allow the wood speak for itself.




Next, the top and back plates are being joined in a nail press and set aside to allow the glue to cure. The first two shots (from a previous build) show the nail press prior to the top/back being glued up.












Here are some pics of the back and top braces laid out on the brace stock.



__________________
Martin 00-18G (1949); Eastman 805 Archie; Waterloo WL-S; Furch Green OM (Sitka/EIR); Tahoe Guitar Co.: OM (Adi/Mahog); 000-12 (Carpathian/FG Mahog); 000-12 (Lutz/Flame Maple); 00-12 (Carpathian/Sinker Mahog); 00-14 (Adi/Ovangkol)


"I can tell you all I know, the where to go, the what to do
You can try to run but you can't hide from what's inside of you"
Reply With Quote