View Single Post
  #7  
Old 12-07-2017, 06:07 PM
Guitartanzon Guitartanzon is offline
Registered User
 
Join Date: Oct 2015
Location: amelia island florida
Posts: 807
Default

I have them on all of my guitars. ..what i do is cut out sections of the tape an only have 3 small anchor points about 1 or 1 1/4 in long .....place at both ends and middle.
It stays on fine and touches less surface area and makes it easier to remove if you want to.
sometimes I used my own thinner & slimmer 3m auto tape and do the 3 pt anchor system

Nirtros tops like my gibsons are a bit more sensitive to removal...then tend to
indent or nail scar if you ry to rub and peel the tape left off with hard pressure..It takes patience and very slow going....this is where the 3 pt adhesive system works better.

I actually bought 4 of these instead of the John Pearse they were ok.....and a lot cheaper...
i used my own 3m tape

see

https://www.ebay.com/itm/2-different....c100506.m3226
__________________
Maritin OOO-15sm 12 fret
Martin Shawn Mendes ooojr
Martin IZ tribute Tenor Ukulele
Martin Custom Shop OO big leaf maple/alpine spruce

Last edited by Guitartanzon; 12-07-2017 at 06:37 PM.
Reply With Quote