Quote:
Originally Posted by lschwart
With the A3, you have no way to get anything between the preamp and the delay unless you use the onboard EQ and effects, and you can't use the DI outs unless you put your compression and reverb before the preamp, which is not optimum. If you put the reverb and compression after the A3, you might not get what you want from the compression in that position, and you'd have to add a DI box to go to the board.
Louis
|
So in a scenario like this:guitar>EQ>compressor>reverb>A3(modelling or not>Delay or chorus) and A3's DI output it won't be a valid chain?
These multi-effect units are meant to be used alone?