Quote:
Originally Posted by Dirty Bill
Does it look right to you experts?  |
No. That pic is for a stereo wiring, and it doesn't seem to be labeled correctly. You'd want the second pickup on the ring tab (second shortest tab) and the lead from the battery negative connected to the switch tab (longest tab).
Its my understanding that the Ellipse Blend is an onboard blender which is usually wired for mono out. There wouldn't be anything wired to the ring tab unless its custom wired for stereo out. In the case of stereo out, you'd need a stereo cable to access both signals. A mono cable would short any signal on the ring tab to ground.
It seems to me that everything (including the Switchjack connections) for this system should be pre-wired
except for the leads from the undersaddle pickup. Those leads must be threaded through the hole in the bridgeplate (when the pickup is installed) before they can be connected to the onboard preamp.
Here are Fishman's wiring instructions for their Switchjack, as they call it:
http://www.fishmanjp.com/support/ins...tall_guide.PDF