View Single Post
  #8  
Old 01-26-2015, 09:50 AM
OddManOut's Avatar
OddManOut OddManOut is offline
Charter Member
 
Join Date: Feb 2009
Location: Carson City, Nv (Want a jackrabbit? We've got extras!)
Posts: 3,084
Default Top Bracing

Here Larry is making the top braces and gluing them to the top on the go bar deck.

A few notes:

(1) The Tahoe 00-14 design is based on the Martin 00-14 design, which has a 24.9" scale. To accommodate the 25.4" scale, Larry's design simply moves the bridge back, leaving the position of the X-brace unchanged. This adjustment can be seen in the picture showing the bracing template. So there is a bit less overlap between the X-brace and the bridge. I suspect this helps contribute to the robust tonal character of this design.

(2) The braces have been tapered at the top to give them a more triangular profile. They will be rounded during the carving process, giving a more parabolic profile. This is in an effort to reduce mass while preserving strength.

(3) All brace ends below the X junction are left untucked, the intent being to maximize vibration on the outer edge of the soundboard.

(4) I have chosen to have no tongue brace.

















__________________
Martin 00-18G; Eastman 805; Waterloo WL-S; Furch Green OM-SR; Tahoe Guitar Co.: OM (Adi/Hog); 000-12 (Carp/FG Hog); 000-12 (Lutz/Maple); 00-12 (Carp/Sinker Hog); 00-14 (Adi/Ovangkol)

Like a castle in his corner
In a medieval game
I foresee terrible trouble
And I stay here just the same

Last edited by OddManOut; 01-26-2015 at 10:32 AM.
Reply With Quote