I set up this time as you suggested using an XLR from the Aura and XLR into the No 2 channel... this gave me a few more dB 's to play with.
So with the Ch2 gain knob @ 1 o'clock with a recording peak of 12dB
Cleaner sound too.
I thought the 1/4 TRS meant it bypassed the preamp and using the XLR use's the preamp.
Ideally with the ID22 I should be able to use the Aura XLR out and connect the 1/4 TRS into the No 2 insert return which would bypass the preamp altogether... thus using only the external Aura Spectrum direct into my DAW.
But I am getting no sound at all when I try this, I have emailed Audient about this..?
I will say though that the ID22 has a great DI built in and gives very very nice results on its own
Thanks again
Alan
|