View Single Post
  #2  
Old 07-21-2019, 08:32 PM
jim1960 jim1960 is offline
Charter Member
 
Join Date: Sep 2015
Posts: 6,015
Default

Quote:
Originally Posted by KevWind View Post
After finding out the new Mac Pro was going to base price @ $6k
I have decided to finish upgrading my current Mac Pro so as to hopefully last another 3 to 5 years.

My Mac is a Mid 2010 333GHz 6 core Westmere

I had already installed a PCIe based SSD for a boot drive about 2 or 3 years ago . and upped RAM to 24 GB.

I just yesterday replaced the old factory installed GPU (graphics card)
With a new Sapphire Radeon Pulse RX 580 8GB GDDR5 ( so as to make my machine Mojave capable) And hopefully improve rendering speed in Final Cup Pro X.

Next I plan on filling the last of the 4 PCIe slots with 2 Samsung PCIe NMVe 970 EVO Plus 1TB SSD blades, on a dual blade adaptor.
Which will eliminate my current use of HDD storage internal drives for Pro tools sessions and FCPX projects and SATA
And should bring my machine relatively close to today's Mid-high end specs (except for RAM speed)
You should see a really nice speed boost from the ssd drives. During the last year I had it, my early 2008 Mac Pro got really moody. I put a bit of money into it but I felt like I was throwing good after bad. I hope you have better luck than I did.
__________________
Jim
2023 Iris ND-200 maple/adi
2017 Circle Strings 00 bastogne walnut/sinker redwood
2015 Circle Strings Parlor shedua/western red cedar
2009 Bamburg JSB Signature Baritone macassar ebony/carpathian spruce
2004 Taylor XXX-RS indian rosewood/sitka spruce
1988 Martin D-16 mahogany/sitka spruce

along with some electrics, zouks, dulcimers, and banjos.

YouTube
Reply With Quote