Quote:
Originally Posted by WiseAxe
It was most likely necessary to disconnect the wire coming from the UST because the strip would not fit through the hole in the bridge plate.
|
Ahhh, if I thought about it more, I should've figured that. Makes sense.
Quote:
Originally Posted by WiseAxe
Stewmac sells an oversized tail pin for guitars with removed tail pin jacks.
|
Cool, will take a look.
Quote:
Originally Posted by WiseAxe
Also- keep an eye on your new string action height… I believe removal of that strip lowers the saddle height by ~ .030 “
|
The tech shimed the saddle so all good.. At some point, I might try a bone saddle/nut and will redo the saddle height at that time.