The Acoustic Guitar Forum

The Acoustic Guitar Forum (https://www.acousticguitarforum.com/forums/index.php)
-   Custom Shop (https://www.acousticguitarforum.com/forums/forumdisplay.php?f=38)
-   -   A Kinnaird Deep Body OM for cigarfan (https://www.acousticguitarforum.com/forums/showthread.php?t=454390)

cigarfan 04-07-2017 05:54 AM

Second trip to Larry for the torch ...
 
For the second time around the neck/peghead is off to Larry to inlay the torch. I am happy to report it has been successfully delivered (thank you FedEx)!

https://farm3.staticflickr.com/2860/...d5f8f0_o_d.jpg

Meanwhile, back at the ranch ... work continues. Here Steve adds the soundport binding.

https://farm3.staticflickr.com/2867/...602a40_o_d.jpg

A glimpse of the soundport from the side. The darker areas on the sides are the remnants of some protective shellac.

https://farm3.staticflickr.com/2933/...eca0ab_o_d.jpg

And the body begins to come together. Here the back is attached to the sides. I love this high-tech approach.

https://farm3.staticflickr.com/2893/...5333bb_o_d.jpg

I am off to the Artisan Guitar Show this weekend. I hope to get some good photos and video from there and post over on that thread.

TomB'sox 04-07-2017 06:10 AM

Looking good Dennis, that back and side wood is so incredibly beautiful....color me jealous.

Wish I could have made it this weekend, was going to take today off, instead ended up needing to work today AND tomorrow morning!!!! Go figure. Have fun.

cigarfan 04-11-2017 04:52 PM

Rosette anyone ???
 
Steve and I have been talking about my rosette. We want it to fit nicely with the fretboard TOL and peghead torch which is quite the challenge. Steve came up with an awesome idea to use some swirly things from the fretboard and and element or two from the torch inlaid in a center ring of Ebony surrounded inside and out by half herringbone Verawood rings to match the purfling we talked about for the top. The wood for the rosette elements will match those used in the fretboard and peghead, namely both shades of Madi, Bloodwood and green tinted Maple. Being the Photoshop crazy person I am, I worked up this mockup.

https://farm3.staticflickr.com/2885/...6dd7c1_o_d.jpg

So Ryan has the base setup with the center Ebony ring and the bwb with teflon spacer in position for the Verawood. I think this will be the ticket.

https://farm3.staticflickr.com/2888/...942d9d_o_d.jpg
https://farm3.staticflickr.com/2866/...6fb676_o_d.jpg

TomB'sox 04-11-2017 06:16 PM

Holy cow Dennis, that will be awesome. You missed your calling, you should be a graphic design artist or something....that looks amazing. Good Luck Steve and Ryan in getting it done to look like that!!!! AND I love the Kinnaird fret board flourish at the end too. That adds so very much.

Nemoman 04-11-2017 06:57 PM

Great collaboration you guys--that rosette will look schweeet will the other elements you have going on!

j. Kinnaird 04-12-2017 11:59 AM

Inspirational
 
That looks great! It gives me ideas. Thanks for the look and good luck bro getting that cut out and inlayed.

Montesdad 04-12-2017 12:35 PM

Quote:

Originally Posted by cigarfan (Post 5301815)

~ ~ ~ Wow !!! ~ ~ ~

ukejon 04-12-2017 12:37 PM

Most impressive looking indeed!

Steve Kinnaird 04-12-2017 08:19 PM

We kicked around the idea at work today of simply printing Dennis' rendering on high quality paper, and gluing it around the sound hole. That way, it would look exactly as Dennis drew it.
Can you say découpage? (Can you spell it?!)
Anyway, it could get scratched up with vigorous playing and simply be replaced.

Always looking out for you, Dennis!

Guitars44me 04-12-2017 09:43 PM

Awesome
 
What a monster rosette! Dennis you rock the photoshop app!

This will be so fine....

And it is a Kinnaird, so we all know the sound will be astonishing, too!

Nice going guys

Cheers

Paul

TomB'sox 04-13-2017 06:59 AM

Quote:

Originally Posted by Steve Kinnaird (Post 5303277)
We kicked around the idea at work today of simply printing Dennis' rendering on high quality paper, and gluing it around the sound hole. That way, it would look exactly as Dennis drew it.
Can you say découpage? (Can you spell it?!)
Anyway, it could get scratched up with vigorous playing and simply be replaced.

Always looking out for you, Dennis!

If you put enough layers of shellac on there, it would hold up....go for it...;) I have stuff my Aunt did years ago and it has held up fine....a nice flower border it had too if you would like to consider that add on....

Marcus Wong 04-13-2017 07:12 AM

Woah... you could have fooled me with that photoshopped rosette! Now the pressure is on Steve to make sure he meets that standard ;)

Steve Kinnaird 04-13-2017 07:43 AM

Ah, no pressure...

:rolleyes::rolleyes::rolleyes:

cigarfan 04-13-2017 03:53 PM

I trust what Steve and Ryan work up on this will be great. Steve dreamed up the rosette design. I just used some technology to make a pretty picture they can use to visualize. The guitar looks awesome so far. There is no reason to believe it doesn't get even better from here!

cigarfan 04-15-2017 09:06 AM

Safe at home in Texas ...
 
Received a long awaited email from my good friends at Kinnaird Guitars last night! The finished TOL fretboard and torch peghead are in their hands. Fantastic news! And WoW ... Wow ... Wow did Larry knock this one out of the park! Even in these quickie photos you can see the incredible detail work. Can't wait this baby up close.

https://farm3.staticflickr.com/2890/...c2629d_o_d.jpg

This torch is better than I imagined and under finish will really pop against the Ebony.

https://farm4.staticflickr.com/3927/...faf75a_o_d.jpg

And as I knew they would, they Texas Kinnairds have begun to amaze with their work on our rosette.

https://farm4.staticflickr.com/3939/...2a2620_o_d.jpg

I am charged up on this build. Exceeding my hopes on so many levels. Tremendous!


All times are GMT -6. The time now is 02:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum

vB Ad Management by =RedTyger=