The Acoustic Guitar Forum

The Acoustic Guitar Forum (https://www.acousticguitarforum.com/forums/index.php)
-   Build and Repair (https://www.acousticguitarforum.com/forums/forumdisplay.php?f=44)
-   -   Best Double-Sided taper for PU Controls (https://www.acousticguitarforum.com/forums/showthread.php?t=603542)

ScaryLarry 01-10-2021 12:10 PM
Best Double-Sided taper for PU Controls
 
The blend control came off on my new Martin 000-28e MD guitar so I was wondering what the best double-sided tape might be to repair it.

TIA, Larry

ScaryLarry 01-10-2021 12:14 PM
It should read double-sided TAPE not taper! ;-)

RonMay 01-10-2021 06:34 PM
Quote:
Originally Posted by ScaryLarry (Post 6600787)
The blend control came off on my new Martin 000-28e MD guitar so I was wondering what the best double-sided tape might be to repair it.

TIA, Larry
If it's new than it should be under warrantee right?
Let the seller fix it at the store.

Ron

ScaryLarry 01-11-2021 12:29 PM
The closest Martin authorized repair shop is 2+ hours away, so I just cleaned up the control and inside the guitar and used some thin 3m double sided tape and all is good.

bnjp 01-11-2021 01:47 PM
Most manufacturers will send you a replacement pad. If not, use 3M mounting tape from the hardware store.


All times are GMT -6. The time now is 03:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum

vB Ad Management by =RedTyger=