I'm not gonna do it, just curious...
Can a luthier remove a pick guard and make it look like it was never there, on a gloss top? Would it be an easy job or super expensive?
|
Quote:
Here's an overview of the process: https://www.stewmac.com/How-To/Onlin..._hard_way.html |
Quote:
Wow, something i would never attempt. |
Quote:
|
If it’s on your 2018 Martin, the spruce top might not have started darkening with exposure to sunlight quite yet. That will depend on how much you’ve taken it out and played it outdoors, or left it out on a stand for extended periods.
If you took off the pickguard and there is either no “tan line” or one that’s barely discernible, you can expect to get the entire top to reach visual equilibrium. But if there’s a clear, obvious shape of the pickguard with lighter wood where it used to be, then getting the entire top to reach a uniform color will be difficult, because the darker exposed wood will always remain darker than the wood that was previously unexposed. It keeps getting darker at the same pace that the lighter wood darkens. The only way that I’m aware of that can make the lighter wood catch up is if you were to make a cardboard template with the shape of the pickguard cut out, which you’d then tape to the top with painters’ masking tape, leaving the pickguard area exposed to light while you leave the guitar out on a stand. Do that and eventually the pickguard area might darken enough to match the rest of the top. That’s more work than I’d ever want to go to, though, so it would be your decision as to whether you’d want to expend that much energy on “correcting” what is only a cosmetic issue, and nothing more. Hope that makes sense. Wade Hampton Miller |
The pickguard left an imprint on my Hummingbird when I first took it off. I glued it back soon, not only because of the imprint, but primarily because a guitar, or at least a Hummingbird, without a pickguard is freaking ugly.
|
Yeah, but what about all that hard glue stuff underneath?
|
Most modern guitars have pickguards attached with pressure sensitive adhesive (AKA self stick). It is not hard, but rubbery. It can be removed with naphtha, which does not hurt the finish.
|
Dental floss probably doesn't work as good as the specialty luthier tools in the link, but it is cheaper and readily available.
|
Quote:
|
One word of caution. I once remodeled a home and used blue painters tape to hold down protective paper on the hardwood floors. It was down for 3 weeks and did get afternoon sunlight through the doors and windows. When I removed the tape there were light stripes where the tape had been. I ended up having to refinish the floors at my cost. I know the floors had a pretty hard finish on them. Not sure what. Now I doubt the the uv was the culprit because the floors were 10 years old. My suspicion is the acidic nature of the adhesive in the tape caused the discoloration. I know it’s not guitars, but after that experience I wouldn’t leave a taped guitar in direct uv for a prolonged period of time.
|
All times are GMT -6. The time now is 04:26 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum