Hatcher Italian Olivewood and Italian Alpine Spruce
I decided to do a separate build thread on a very special build I am taking on. I have been working on a number of new ideas and techniques that I intend to use on this build. I'll start with some of the inspirations behind this guitar to give you a view into my rather manic process of designing a guitar.
One of the reasons Karen and I moved to New Hampshire and to Peterborough in particular was the wealth of art that is ingrained into the community here. It starts with one of my neighbors, Howard Hitchmough. Howard is a fabulous knife maker and all around great guy. To give you an idea of his work here is a picture; https://c1.staticflickr.com/5/4187/3...f43c813b_b.jpg Howard has recently retired and invited a kid (me) into his candy shop (workshop) to see if I wanted anything. You probably have already seen some of his candy on my recent guitars like the partially fossilized wooly mammoth tusk bark etc. Howard asked if I wanted this piece of Olivewood that he had in his wood stash; https://c1.staticflickr.com/5/4158/3...663be350_c.jpg Howard was in the habit of dating the wood he acquires; https://c1.staticflickr.com/5/4185/3...43d39f01_c.jpg So you can see he's had it for about 26 years. It's 2 inches square by about 18 inches long. Of course, when I look at it I don't see knife handles I see a bridge; https://c1.staticflickr.com/5/4166/3...ec57dda8_c.jpg Figured wood can be a cracking problem on bridges but, when it's that old it's probably has done whatever it was going to do and there aren't any cracks anywhere. So I've had it out in my shop and have been studying up on Olivewood. It's harder than most rosewoods and tough as nails so no problem for bridges or fret boards. I thought an Olivewood guitar would be in order when I came across this Italian Olivewood salvaged from an orchard in Italy; https://c1.staticflickr.com/2/1626/2...7a4b2573_c.jpg I haven't worked with Olivewood although I've heard some wonderful things about it. I thought I should introduce it to my tools and see how they got along; https://c1.staticflickr.com/6/5716/3...cc1955c4_c.jpg https://c1.staticflickr.com/6/5743/2...7b9dc5a5_c.jpg What a joy to work with! Went over pretty big with my all Italian wife, Karen too! Part of the joy of working this wood is the whole shop smells like a Northern Italian restaurant as soon as it touches sandpaper. It carves like soapstone. So I went back and bought all of it. A couple of the billets have a lot of figure and some also have spalting and a few of the billets are big enough for backs and sides. https://c1.staticflickr.com/2/1520/2...18772729_c.jpg https://c1.staticflickr.com/6/5474/3...bec1797e_c.jpg Of course if your going to have an Italian Olivewood guitar you should probably have Italian Alpine Spruce for the top; https://c1.staticflickr.com/2/1638/2...5fb2dbf2_c.jpg So it begins. I have a theme, new techniques to try, and some wonderful materials. I hope you follow along on this little adventure! https://c1.staticflickr.com/5/4188/3...2d8d58d8_b.jpg Mark |
Let's see: I collect knives, play guitars, just returned from Venice, worked in Peterborough for a few years, and I'm a wood scientist. How could I not follow this thread? Looks great Mark.
|
I'm in! Like the navigator in the above picture ( he has his boat listing to port ever so slightly ). All by design to make the next bridge opening. Good wishes as you make your way!
|
Fascinating! I will be watching!
|
I'm so very much onboard for this build, Mark...
For personal reasons, I've been intrigued with the prospect of an Olivewood guitar for quite some time, and I'm truly envious of this beautiful specimen that you've been able to procure. I'll be following this thread with a curious mind.....and an inspired heart. Joel |
Well Mark, you have done it again, found some absolutely stunning wood that will end up being phenomenal. I mean how do you do it, that back is amazing!
|
Looks great, Mark. Of course, when it's completed, you'll have to arrange a demo concert in northern Italy. Full circle.
Steve |
Quote:
Quote:
Quote:
Quote:
Quote:
|
Quote:
|
Olivewood
That is one of the woods which have been on my radar for a while now (can't have them all, sorry, Mark) and when I saw that piece in your shop it certainly caught my attention. I will be MOST interested to see how it turns out and to hear a description of the sound.
|
I've always thought that Olive wood was one of the most beautiful woods. I'm looking forward to see how this turns out. Kudos to you for giving it a shot!
|
I made an olive and incense cedar ukulele. It was a pleasure to work with as you say, so easy to shape and bends nicely too.
|
Quote:
Quote:
Quote:
Here is a picture of the back joined, back graft on and a new style Olivewood logo chip in place; https://c1.staticflickr.com/9/8645/3...b34c830c_c.jpg |
I like that Howard Hitchmough knife. Excellent to see such old world talent.
|
Another beautiful palette from Mark--looking forward to this!
Any idea what kind of tone to expect from Olivewood? |
All times are GMT -6. The time now is 04:47 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum