Grace Felix and ToneDexter - Dumb Question
 

I recently purchased a ToneDexter (TD) and really LOVE what it does to my amplified acoustic guitar tone. I plan to purchase a Grace Felix which is a 2 channel preamp so I can run the TD and a DPA 4099 gooseneck mic through the Felix and blend the signals to my pedals.

Here's the dumb question - Should I remove the rubber feet from the Felix and TD and VELCRO these onto my pedalboard? The Felix especially is such a beautiful piece of equipment, I hate the idea of removing the feet and sticking VELCRO to it. I also don't know if these are just to large and heavy to do this. That said, it would be nice to have all my equipment attached to my pedalboard so I can just plug and play without too much set up at every gig. Thoughts?

I use a board like this with zip ties instead of velcro.

https://reverb.com/item/18648650-hol...-w-bomber-case

Remove the feet (they screw out) and use powergrip tape...

https://reverb.com/item/29656884-pow..._source=google

The powergrip tape works way better than velcro, and having your Felix on your board will make things so much easier! I have the same board as the above poster (Holey), but I get rid of the ties and went with griptape and it's GREAT.

https://i.imgur.com/Cd0XK7f.jpg?2

I didn't know about the holeyboard or power grip. Both great ideas! The holeyboard looks awesome! Unfortunately, I just bought a powertrain pedalboard so the power grip may be the way to go for me. I agree having all the pres and pedals on the board seems like it would make life easier.

I did exactly that to my Alix. Remove feet, attach velcro, put on pedalboard. Feet are easy to re-install, and any residue left by adhesive can probably removed with a solvent that won't harm the Grace's anodized or powder-coated finish.

I installed my ToneDexter and a Boss DM-2w on a board. I trimmed back, with an exacto knife some of the rubber on the feet of the TDx so the velcro would make solid contact. But I didn't remove all of it, so there's still rubber feet if I decide to go plain TDx.