French Polish
I'm just getting into the final sessions French polishing my latest Woodman 00 guitar. I enjoy French polishing because it's such a hands on process:
https://live.staticflickr.com/65535/...37854719_b.jpg After I get the final coats on next week it will need to harden up before I do a final buff. During that time I'll make and attach the bridge. I'll also be doing the other details such as the nut and saddle, truss rod cover, mounting the tuners and finally stringing it up and the initial set-up. I hope to have that much done by the end of the week. |
I love all of your updates on my Woodsman Mark. It's looking great and I'm getting more excited the nearer it comes to completion. Like I said before, this model just exudes "old tone".
|
Hi Mark, how many of those coats or layers are applied ? Is that the same for each wood or does it differ ?
Thanks, Lonzo |
Quote:
Quote:
With regular French polish using bleached shellac and oil the coats go on much thinner and are pretty much burnishing in. I do probably 70 micro coats or so. Here are some progress pictures of the Woodsman: https://live.staticflickr.com/65535/...94070892_c.jpg https://live.staticflickr.com/65535/...8ef16bea_c.jpg https://live.staticflickr.com/65535/...9f7c9f49_c.jpg |
Do buff with a compound? By hand or machine?
|
Quote:
|
Quote:
|
Quote:
Bruce. |
Quote:
I made an early commitment to mastering French polish because when well done I personally feel there is no better finish for guitar. |
What does a luthier do on the weekend?
The weekend is here it's time to work on the shop as opposed to in the shop. But I guess I have to be in the shop to work on the shop. In the shop to me means working on guitars, except it's the weekend so it means I'll can work on the shop. Hmm, Maybe I'm spending too much time in the shop :)
If you've been following my posts lately you may know that I'm slowly converting my shop over to non-powered hand tools only. The soul of a power free woodworking shop is the workbench. So I got the best I could afford and I've been making it my own and setting it up for the things I do when making guitars. I'm in the process of building out the hand tool wall behind it as well. The first thing I added on the back of the workbench was a 6" wide tool shelf. I added it not so much for tools but for catching small stuff that falls off the back of the bench. The bench weighs hundreds of pounds so it isn't easy for one person to move. The second reason I added the tool shelf was to pull it away from the wall a little bit. It gives me more access to the bench top because I have tools hanging on the before mentioned tool wall. They get in the way and worst case scenario a tool drops from the wall and goes right through the back of an almost finished Tree guitar back. Then I added a clamping shelf onto the bench end. That comes in handy and it uses the 3/4" hardware I already have. The bench itself has 1" bench dog holes. Another big advantage is it goes over the trash can. I've had a couple small items drop off the tool wall and mysteriously disappear. That won't happen any more! So this weekend's project is a woodworking job. I saw this picture in an ad for this swing stool: https://live.staticflickr.com/65535/...3be5d594_c.jpg It would be perfect in pretty much the same spot on my workbench. I do almost all of my work standing but for close work like inlays or cutting the miters around an end graft it's best to sit. This is perfect for that and when I stand up I can easily knee it around out of the way under the bench. No more tripping on that stupid roll-around stool that is always lurking, waiting to strike. The swing-away stool comes with or without the seat. I have just enough European Beech left over from the tool tray I made to make my own seat. The Beach matches my workbench perfectly with a couple coats on linseed oil on it. I expect the shipment this Wednesday or Thursday and I aim to have the seat ready to go. I'm joining 5 pieces together to make the seat. My workbenches' laminated top has splines running down the joints for strength and to prevent warps so I thought I'd do that on my seat too. To make it mine I'm making the splines out of Eastern Black Walnut. The ends will show and have a nice contrasting touch: https://live.staticflickr.com/65535/...6c9f2063_c.jpg Here it is on the workbench getting glued up: https://live.staticflickr.com/65535/...aa379efb_c.jpg Tomorrow I'll unclamp it and clean it all up and put the finish on. Then back to work in the shop on Monday! Thanks for getting through all that! Mark |
Work ON the shop
I love the idea of a hand tool only Shop! And your seat top will match the bench? How cool is that???
Very nifty! Enjoy it Paul |
Quote:
Thanks for sharing your bench. I love reading about your iterative shop. I'm looking forward to seeing how the stool turns out under finish. |
Great improvements to the shop, Mark, increasing both safety and functionality at the same time. I put a removable tool tray on the back of my bench and am happy with it for the same reasons. The seat should look super with the walnut splines! Thanks for sharing! Dave
|
Guess I wouldn't recognize the place (on the inside). That is an awesome seat Mark. Cool stuff!
|
Quote:
Quote:
Quote:
Quote:
Well the glue dried and I cleaned up the Euro Beech seat this morning: https://live.staticflickr.com/65535/...0076e9e2_c.jpg Here it is with the first Linseed oil coat drying: https://live.staticflickr.com/65535/...ec801a06_b.jpg So I'm all set for the base to come this week and I'll get this all set up! Mark |
All times are GMT -6. The time now is 09:08 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum