The Acoustic Guitar Forum

The Acoustic Guitar Forum (https://www.acousticguitarforum.com/forums/index.php)
-   Archtops (https://www.acousticguitarforum.com/forums/forumdisplay.php?f=56)
-   -   Archtop bridge terminology (https://www.acousticguitarforum.com/forums/showthread.php?t=465048)

tdq 03-30-2017 11:13 PM

Archtop bridge terminology
 
If someone can answer this for me, then the thread can disappear into the depths of ... wherever threads go to die.

What is the correct terminology of the parts of an archtop bridge? i.e. what do you call the bottom bit? The top bit? The whole bit? The wheels and posts? (probably wheels and posts...)

MC5C 03-31-2017 10:08 AM

I call the base "the base" and the saddle either "the saddle" or "the topper" and the adjusters are just the adjusters.

Jabberwocky 04-06-2017 08:55 PM

The saddle goes on the base. The two of them are known collectively as the bridge. The metal bits are thumbwheels and bridge posts.

On a T-O-M saddle, the sliding bits are saddle pieces. Many people refer to them as "saddles" and the T-O-M as the "bridge". This is because on a solid body or semi-hollow with fixed posts/rods but without a floating base, the TOM saddle is also the bridge. There are Nashville Stud TOMs and ABR-1 TOMs. Most archtop guitars use the ABR-1 TOMs.

Confused?

It depends on whom you are talking to. To archtop people, the floating bridge with a saddle and a base is simply, "the bridge". There are those who "pin" a floating bridge to the top with pins so that it doesn't move. This is known as a pinned bridge. It can be made to float by removing the pins. The holes in the top remain but are mostly hidden by the base.

Dan Koentopp carves one-piece floating bridges for his archtop guitars. So, the saddle and base are one as on a violin, viola, cello or double bass.


All times are GMT -6. The time now is 11:10 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2000 - 2018, The Acoustic Guitar Forum

vB Ad Management by =RedTyger=