Stephen Kinnaird SJ BRW/Italian Spruce build just for me!
Hello. I started a thread a few months ago regarding an upcoming build looking for rosette ideas. The time has come and after about a 6 month wait, the guitar has begun. I have been discussing with Steve the particulars now over that time period and he has been great in guiding me through the process. I know that I have probably been a pain to work with as sometimes I hate myself!!! Through it all he has been patient and kind. I have great hopes for this guitar and trust Steve and Ryan to pull not only a beautiful looker but beautiful sounder as well out of this one. Describing sound is so hard for me, but I told him I wanted a strong bass (he said "SJ"), I also want sustain that goes on forever with wonderful overtones. That is about it for marching orders.
Here are the specs: Model: Kinnaird SJ (25.4" scale) Nut: 1 3/4" Pin Spacing: 2 1/4 inch Top: Italian Spruce, master grade Back/Sides: BRW Rosette: TBD yet, but most likely Koa with abalone rings in some variation or another. Bindings: Koa Purfling: Radial wood with b/w/b, species yet to be determined. Neck: One of my favorite features on Steve's guitars: Mahog/b/maple/rosewood/maple/b/mahogany. These are so beautiful when done. Headstock overlay: BRW, Steve found a really cool piece "laying around" Tuners: Alessi tuners with wood pegs and gear inlay Fretboard: Ebony Bridge: BRW Other features include a Ryan style arm bevel trimmed in Koa and plus or minus a sound port. I have not made up my mind on that one yet. Thanks, I am very excited and will post some pics soon. I have to learn yet how to do that. Tom |
[IMG]http://i1020.photobucket.com/albums/...ruce%20top.jpg[/IMG]
This is the top we picked out. We had four to chose from and felt this looked to be the best, although they were all great. Steve says it "rings like a bell". |
OK that is big....I will try to figure out how to make that smaller somehow????
|
http://i1020.photobucket.com/albums/...%20set%202.jpg
This is the back set I selected. I think it is really stunning. Just my opinion as I aware it will not be everyone's cup of tea. |
And enough for now, but this is the back joined. We all thought it looked so good this way, we elected not to do any back inlay, it seemed to have its own inlay already....
http://i1020.photobucket.com/albums/...Attachment.jpg Sorry for the sizing issues, I am new at this and hopefully can get it figured out...not too big, not too small....Hopefully you can see it alright. |
Hey Tom,
I think you did pick out a spectacular piece of wood. I'm having fun just getting to smell it around the shop. I did a quick count and this is the 82nd guitar that I've got to help build in our shop and the 5th Brazilian, but it's been about 4 years or so since the last. Too long for me. We specialize in alternative woods so we know that you can get great sound out of many types of woods, but there is a certain sound that Rosewoods (especially Brazilian) have that I don't get tired of hearing. I'm sure you're going to be pleased. Can't wait to get you some more pics of the progress. You probably won't see too much of me until the rosette gets nailed down, but it's going to go by faster than you know. Enjoy it! |
Thank you Ryan. I have all the confidence in the world in you two. That dang rosette and fret markers have truly been the most stressful for me, so no pressure at all on that! Thanks a bunch.
Looking at that top again in this picture, talk about tight straight grain, really??? I don't know how much better that could be, but then again, I just play em, I don't build or critique them!!! This is going to be a world class guitar and I am sure I will never get out of it what it will be capable of and that will only prompt me to work harder and play better!!!! I know there are some on this forum that feel the guitars do not measure up to their abilities where I feel just the opposite, I will never match this Kinnaird potential. Best to you and Steve, Tom |
Quote:
And of course, congratulations on this upcoming build!! If I have learnt anything so far, it is that these luthiers are making a living out of this for a good reason. Trust their judgement and they will surprise you every step of the way :D |
What STUNNING wood ... can't wait to see this one come together!
|
The BRW is gorgeous Tom. Sounds like a wonderful instrument will result here. I'm excited for you. Look forward to following along.
|
Quote:
|
Quote:
Thanks for taking the time to post. Tom |
Already, you guys know Tom to be good natured, easy going and possessed of a fine wit. I have been enjoying our email correspondence immensely. The planning/dreaming stage is one of the most enjoyable parts of lutherie for me. For one thing, you haven't made any mistakes yet. For another, you start the process of getting to know the client. Tom has been a lot of fun to work with!
Here's to a guitar we'll both be proud of, Tom! Steve |
Congratulations Tom,
I was fortunate to be able to trade for my Kinnaird, and it is simply one of the best guitars I've had the pleasure of playing. Enjoy the process, and if it is anything like mine, I'm sure you'll be thrilled. Beautiful choices on the wood too! Also, different strokes for different folks, but I wouldn't think twice about adding a sound hole.:D Dan |
Stephen Kinnaird Guitars
You are going to love this guitar! Steve and Ryan make wonderful guitars, I've owned and sold many, and get requests on a regular basis! Congratulations! I know your excitement!
|
All times are GMT -6. The time now is 11:48 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum