Thank you all for the encouraging words. This is an exciting time for me, with lots of music in my life and some ridiculously good guitars to inspire me. And another on the way! Check out my first view of the top with the cutaway:
https://scontent-dfw5-2.xx.fbcdn.net...a9&oe=5BCC1B30 |
3 Attachment(s)
Perhaps you'd like a neck with this body Stan?
Here are the loose parts awaiting glue/clamps. Dark center stringer to match back inlay, b/w lines either side, and then the main sections of Honduran mahogany. Attachment 11807 Then comes the glue and clamps: Attachment 11808 And a shot to further illustrate the over/under clamping pattern, to distribute clamping forces more evenly: Attachment 11809 It all looks pretty rough at the moment, but will clean up nicely. We'll leave this in clamps for at least 48 hours. Steve |
Fretboard making. A 12 fret Texas Ebony fretboard with a curved end.
I cut out the blank (pictured last page) to shape. Then I rout a channel for purfling. https://s19.postimg.cc/clwwyf49v/584...0738749_CD.jpg After the purfling is glued in, then we have to bind the fretboard. Once bound we radius the board with sandpaper to a 16” radius. https://s19.postimg.cc/s3vwiymwz/0_B..._EBC5672_A.jpg Then we clean the slots, sand the binding to correct width, and check it out. https://s19.postimg.cc/bsvsmni4z/2_D..._FEF5695_A.jpg Thanks for watching. |
That is a beautiful color on that fretboard, will go so well with the top once finish is applied!
|
Oh, man. This makes me think of a certain Beatle song. https://www.youtube.com/watch?v=c6yYxyxx4aE
|
Steve cutting the binding channel .
https://scontent-dfw5-1.xx.fbcdn.net...a6&oe=5BF26E6F Bending the bindings for the cutaway. https://scontent-dfw5-1.xx.fbcdn.net...a2&oe=5BFF5467 |
Coming right along now Stan, pretty soon she'll be off for a few week spa trip, that is the hardest part!!!
|
I know, Tom - no pics for weeks!
|
Another beautiful build.!!. Can't wait to see the finished guitar and hear how it sounds. Russ
|
The coloring is great, just exuding warmth! Love how this is looking. Should be gorgeous under finish.
|
I was lucky enough to see this guitar in person this weekend and boy is it beautiful! I made a trip down to see Steve and pick the wood for my upcoming 00. Spending the afternoon with Steve was great and seeing the guitars they are currently building always makes for a great day. This guitar is going to be amazing and I cant wait to see it completed. Congrats!!!!!
|
End wedge installation:
Here’s our jig for the router to sit on that cuts the exact shape of the wedge. https://s19.postimg.cc/ahikl3tqb/7_F...569_BF2027.jpg After the channel is cut, we test fit the piece. https://s19.postimg.cc/v1nejlwmr/792...AABB13_BF3.jpg Gluing the wedge in with band clamps. https://s19.postimg.cc/w3xl2500j/D87...9841_F1182.jpg We didn’t have a piece of Amazon Rosewood that we thought was pretty enough, so we actually had to settle with a piece of Brazilian. https://s19.postimg.cc/n8wqrmixv/10_...AAEFC0_EF1.jpg |
Oh man! Does that mean I can't take this to my gigs overseas? ;)
|
Stan, one look at the sides and back and those officials will be hauling you off.
Good luck! ;) Steve |
Aw man, if I had known that . . . I still would have chosen that Guatemalan rosewood. You'll just have to make me another guitar for my gigs in Afstanagain.
|
All times are GMT -6. The time now is 10:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum