|
Paduak Piņa spec progress shots
Here are some progress pictures of my new Piņa parlor spec. This is figured Padauk with a Swiss Spruce top;
https://c3.staticflickr.com/8/7435/2...7f9bf77e_c.jpg https://c4.staticflickr.com/8/7679/2...b856be46_b.jpg https://c3.staticflickr.com/8/7296/2...59191290_c.jpg https://c8.staticflickr.com/8/7072/2...a384b755_c.jpg https://c4.staticflickr.com/8/7072/2...4bf16977_b.jpg https://c6.staticflickr.com/8/7228/2...79361258_b.jpg https://c4.staticflickr.com/8/7633/2...b706726c_c.jpg https://c6.staticflickr.com/8/7627/2...1d12504a_b.jpg Keeping busy in New Hampshire! |
Quote:
Let me just say, I also think it is a steal for the price and am a little surprised that Mark did not price this higher. The sound is a nice full balanced sound, not anything like the bright sound maple gets maligned for. It is a steal for someone, and some of the most amazingly beautiful wood you have EVER seen. addendum: I am not a paid spokesman for Hatcher Guitars hahaha! |
I would agree with Tom, the Maple guitar is mesmerizing in person, and the craftsmanship is fantastic! You can look at the guitar a hundred times, and each time see some new detail, depending on the light and how you move the guitar. I don't know that I've ever seen anything like that. It was very light and effortless to play, took a pick as well as fingers, and sounded fantastic - deep and rich. It was very challenging to let Mark take it home.
|
Show Spec #4 Swiss Spruce/Ebony Penelope
I am about ready to send the fourth of my show spec series off to the finisher.
I'll do some final clean up and the frets on Monday. This is my Penelope 12 fret model. It has abalone in places I have never put abalone before. The trim is Koa and the elevated neck is Koa as well; https://c3.staticflickr.com/8/7430/2...5e4c8b82_c.jpg The headstock is my sculpted pillow topped shape. I've never done one in black Ebony before and I can't wait to see how reflections will roll around on that sculpted head plate when it gets back from the finisher. https://c5.staticflickr.com/8/7432/2...4cc1eb0b_c.jpg https://c5.staticflickr.com/8/7411/2...e0004df2_c.jpg https://c1.staticflickr.com/8/7373/2...68506d82_c.jpg https://c4.staticflickr.com/8/7465/2...a23e7087_c.jpg https://c8.staticflickr.com/8/7439/2...889c1124_c.jpg The black Ebony will get very black under finish but, the Koa will really come to life with more figure and a warmer red color. Here is the back of the neck wet with naptha; https://c3.staticflickr.com/8/7426/2...fdcf5082_c.jpg Thanks for viewing! Mark |
That's the best looking guitar I have seen from you...and you've made some crackers...
Has a bit of an Olson vibe to it, looks like a fingerstlye dream. |
Exquisite elegance at every angle. I've never seen anyone use a Koa neck. Do you think it will affect the tone (in a good way)?
|
Quote:
Quote:
|
I want to make a point on my Piņa Parlor Spec
Here is a series of shots that show how I try to create a clean joint on the point of a Florentine cutaway and align the wood grain as it crosses over.
When I bend the side, I bend it with the cutaway part still attached; https://c7.staticflickr.com/8/7297/2...40953f07_c.jpg I then cut it at the point and hand bend the "cup" of the cutaway on a bending iron. After that I miter the joining edges; https://c3.staticflickr.com/8/7459/2...4eb36722_c.jpg I join the points and apply binding tape to the outside while the point is opened flat; https://c1.staticflickr.com/8/7651/2...a815eefd_c.jpg https://c1.staticflickr.com/8/7344/2...e71937f2_c.jpg Then I put the side in the body mold. When folding the point to shape the tape pulls the joint up tight. From there I run a line of CA glue on the inside to lock it; https://c7.staticflickr.com/8/7378/2...2f9e110a_c.jpg I take the side out and steel bar (not sand) the edge. Here I'm using a scraper burnisher; https://c7.staticflickr.com/8/7329/2...7c84a284_c.jpg https://c7.staticflickr.com/8/7336/2...c550e7a0_c.jpg Then I glue in the supporting wedge; https://c1.staticflickr.com/8/7225/2...0c3f52e4_c.jpg This doesn't work every time, in which case I bind over the joint. I've had a couple builders ask me how I do this. If anyone has a better or additional steps that work please share! Thanks for viewing! Mark |
Great info. Amazing that the little line of CA glue on mostly end grain actually holds the piece in place prior to adding the supporting wedge. Also, tell more about the burnishing rather than sanding....
|
Mark,
This is, among many other reasons, why I always view your posts! this is most insightful and helpful. Thank you for sharing this in such detail. LOVE IT!! |
Hi Mark!
Kudos! This is exactly the way I did my first cutaway too, and it worked like a charm. Why do you use the burnisher on the edge of the cutaway, btw? Bye Q. |
Quote:
Well, what can I say? Your guitars have a certain WOW factor that gets my heart beating. Some call it GAS, I call it "NORMAL" ha! This guitar looks to be something really special. You may have said it already and I missed it, but what is the difference between your "show spec series" and your others? Is it just that you are building them for the SB show, or have you made certain changes to specs, or? Also anxious also to hear some sound clips of some of these. I was unable to make the get together that a few of my AGF friends attended...I'm in the midwest ya know...severe travel disadvantage lol. So, some of us hillbillies need to take the next best thing...sound and/or video clips :). Thanks for helping satiate my need for eye candy :D |
Quote:
Quote:
|
Quote:
I'm glad you find this helpful! Mark |
Quote:
My intentions were to do some of the various guitar shows and I wanted to start to build up an inventory of guitars to bring to these shows. This takes some time and money on top of the custom orders I am currently working on. Turns out these shows are all booked up this year so I started mentioning that these are available for sale. My first two, the Claro Walnut Parlor and the BRW Greta are already sold and I have the recently completed Maple Josie available with sound clips on the AGF Marketplace section; http://www.acousticguitarforum.com/f...d.php?t=432024 The idea of the series was to show a variety of guitars, styles, and options I have or can do on custom orders (and selling some of them doesn't hurt either:)) Thanks again for your comments, Mark |
| All times are GMT -6. The time now is 08:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum