The Acoustic Guitar Forum

The Acoustic Guitar Forum (https://www.acousticguitarforum.com/forums/index.php)
-   Custom Shop (https://www.acousticguitarforum.com/forums/forumdisplay.php?f=38)
-   -   Beau Hannam 12-fret 00 (https://www.acousticguitarforum.com/forums/showthread.php?t=575233)

Chipotle 07-25-2020 09:26 AM

Fretboard bound, now it's time to apply the radius.

https://jfbenjamin.com/Hannam-build/27411.jpeg https://jfbenjamin.com/Hannam-build/27412.jpeg https://jfbenjamin.com/Hannam-build/27414.jpeg https://jfbenjamin.com/Hannam-build/27416.jpeg https://jfbenjamin.com/Hannam-build/27417.jpeg https://jfbenjamin.com/Hannam-build/27419.jpeg

Chipotle 07-26-2020 06:15 PM

Time for more inlay. The design for the rosette will continue across the end of the fretboard, like this:

https://jfbenjamin.com/Hannam-build/fbinlay1.jpg

We're leaving off what would normally be the last fret to leave room. The paper design is cut to make templates to cut the mother of pearl.

https://jfbenjamin.com/Hannam-build/fbinlay2.jpg

The paper templates are glued to a piece of MOP and cut with a jewler's saw, then filed & sanded to the final shape.

https://jfbenjamin.com/Hannam-build/fbinlay3.jpghttps://jfbenjamin.com/Hannam-build/fbinlay3b.jpg

Details I never thought about... MOP reflects differently at different angles. A careful luthier will make sure that the pieces are cut so they all "flash" together.

https://jfbenjamin.com/Hannam-build/mop-flash.jpg

Here are the pieces cut and set in position, to be inlaid into the fretboard soon.

https://jfbenjamin.com/Hannam-build/fbinlay4.jpg

Chipotle 07-30-2020 09:13 PM

Next up - position markers. "Searching for the perfect pieces" of mother of pearl.

https://jfbenjamin.com/Hannam-build/shell-hunting.jpg

Treenewt 07-30-2020 09:52 PM

That rosette is just too dang cool! Beautifully done!

Chipotle 08-02-2020 12:15 PM

Closer look at the almost finished fretboard end. Beau does some cool stuff with "shading" on the MOP to add a kind of shadow where parts of the design appear to go underneath others, adding a 3D effect.

https://jfbenjamin.com/Hannam-build/...lay-shaded.jpg

Chipotle 08-02-2020 12:21 PM

Now on to the fretboard position markers.

https://jfbenjamin.com/Hannam-build/mop-frets.jpghttps://jfbenjamin.com/Hannam-build/markers.jpg

After the pieces are cut, the outline is scribed into the fretboard with a knife, and the inside is routed/chiseled out. Small gaps are filled with ebony dust and black CA glue.

https://jfbenjamin.com/Hannam-build/marker-fill.jpg

When dry, it's cleaned up.

https://jfbenjamin.com/Hannam-build/markers-cleaned.jpg

Chipotle 08-07-2020 07:32 PM

Time to choose a face for the slotted headstock. So many choices!

https://jfbenjamin.com/Hannam-build/hs-faces.jpg

Here's a nice layout, taken from the middle of the unnumbered piece going horizontally across the top of the numbered ones, above. It's bookmatched with a sister piece. A clear template of the headstock is overlaid (without the slot-head cutouts).

https://jfbenjamin.com/Hannam-build/hs-template.jpg

Chipotle 08-07-2020 07:38 PM

Here's a mockup of how that last one might look with the slots and inlay.
https://jfbenjamin.com/Hannam-build/hs-mockup.jpg

Chipotle 08-20-2020 08:29 PM

Inlay continues, now on to the end graft. This is Beau's design, working off the rest of the inlay which was mine. Here is the rout:

https://www.jfbenjamin.com/Hannam-build/graft-rout.jpg

And with the MOP laid in but not finished:

https://www.jfbenjamin.com/Hannam-bu...ft-laid-in.jpg

Chipotle 08-25-2020 07:20 PM

Beau mixes three different colors of filler to pour on the poor pores.

https://jfbenjamin.com/Hannam-build/pore1.jpghttps://jfbenjamin.com/Hannam-build/pore2.jpghttps://jfbenjamin.com/Hannam-build/pore3.jpg

cigarfan 08-28-2020 07:07 AM

Oooohhh! That is cool. Love the outcome!

Chipotle 09-23-2020 04:23 PM

We decided to go with something a bit plainer for the headstock face, still with some nice character but less distracting from the inlay design, and a color that meshes a bit better with the rest of the guitar woods.

https://jfbenjamin.com/Hannam-build/headstock-face.jpg

Glued to the headstock and bound. I love Beau's signature "faded purfling" at the top of the headstock.

https://jfbenjamin.com/Hannam-build/headstock-bound.jpg

The last of the inlay design. It ties in to the design on the engraved tuner plates.

https://jfbenjamin.com/Hannam-build/...nlaydesign.jpg

Chipotle 09-29-2020 10:33 PM

Beau knows inlay...
 
Before I continue with my guitar, I have to share this incredible uke headstock that Beau did the inlay on. He does some incredible work, and his use of different shades of MOP and some fine etching gives amazing 3D detail.

https://jfbenjamin.com/Hannam-build/daf-inlay.jpg

Chipotle 09-29-2020 10:38 PM

Back to our regularly scheduled build thread. Title: How to Slot Your Headstock.

https://jfbenjamin.com/Hannam-build/slot1.jpg

It's a boring job....

https://jfbenjamin.com/Hannam-build/slot2.jpg

Cleaned up a bit.

https://jfbenjamin.com/Hannam-build/slot3.jpg

Here's how it will look with those fantastic Rodgers tuners.

https://jfbenjamin.com/Hannam-build/slot4.jpg

All squared away.

https://jfbenjamin.com/Hannam-build/slot5.jpg

cigarfan 09-30-2020 05:51 AM

Schweeet! Those Rodgers look incredible. Love the ramps.


All times are GMT -6. The time now is 10:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright ©2000 - 2021, The Acoustic Guitar Forum

vB Ad Management by =RedTyger=