The Acoustic Guitar Forum

The Acoustic Guitar Forum (https://www.acousticguitarforum.com/forums/index.php)
-   Custom Shop (https://www.acousticguitarforum.com/forums/forumdisplay.php?f=38)
-   -   Oops! graft grain wrong! (https://www.acousticguitarforum.com/forums/showthread.php?t=534226)

hartguitars 01-10-2019 02:11 PM

Oops! graft grain wrong!
 
I'm just about done building 3 OMs, my 3rd, 4th and 5th build. I don't know how I missed the fact that the back graft bracing is supposed to have the grain oriented 90 degrees to the back grain. I must have skimmed over that page in Cumpiano. This is rather upsetting. The guitars are all coming out very nicely. So the question is, do I fix somehow? Or let it go? It makes perfect sense why you would orient the grain that way now that I'm aware. The graft is basically useless running the same direction. Any thoughts?? I could fix the one under the sound hole relatively easily, but the others would be very difficult.

Thanks for your input!

D

Halcyon/Tinker 01-10-2019 03:11 PM

Sounds like it's too late.

But unless you have a decorative back strip, the back graft is not actually necessary so I wouldn't worry too much.

hartguitars 01-10-2019 04:03 PM

They all have thin backstrips inlaid.

mcgr40 01-10-2019 04:31 PM

I think you are speaking of the piece I call the "marriage strip", and while it might be best to have it at right angles to prevent the joint from opening, it seems likely the guitar will survive just as well. At right angles it would be more resistant the seam failing, but it is still probably pretty unlikely with precise joinery. Acoustically, you still have the same weight in roughly the same spot.
I am guessing it will be okay.

hartguitars 01-10-2019 04:56 PM

ha, marriage strip, I like that. It will be interesting to see if any dealers/appraisers notice. I'm hoping to shop these around a bit once finished.

hartguitars 01-10-2019 05:04 PM

I also don't think I've ever seen a guitar fail at that joint. I've often seen cracks somewhere between the binding edge and center seam.

Simon Fay 01-10-2019 05:40 PM

I've been building for about 15 years now - most of that full-time. Here's my back centerstrip. I think you'll be okay :)

http://fayguitars.com/Guitars/Galler...lres_24933.jpg

hartguitars 01-10-2019 06:58 PM

OK, thanks. That's a relief. That look freaking gorgeous by the way. That kerf lining is very interesting. Like an accordion.

Simon Fay 01-10-2019 09:03 PM

The kerfing is sold by Kevin Ryan - called A4 kerfing. He has evolved the product and now has a product called A5. It's very nice stuff - highly recommend.

Bruce Sexauer 01-10-2019 09:59 PM

I think it doesn’t matter.

David Wren 01-11-2019 08:53 PM

I wouldn't get too bent out of shape about it.


All times are GMT -6. The time now is 09:18 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2000 - 2018, The Acoustic Guitar Forum

vB Ad Management by =RedTyger=