Did they ever build Banner Gibson J-45s with a 1 11/16" nut width?
Hi guys,
I was checking out the Carter's Vintage Guitars website earlier today and saw a '44 Banner Gibson J45 for sale. I don't doubt Carter's and it does from my inexperienced eye look like a banner Gibson with a replacement upper belly bridge that are usually found on the fifties J-45s along with a pickguard that they were using around the 60's, I think. But what threw me off was the listing of the nut width as 1 11/16". From what I know weren't all Banners built with a 1 3/4" nut width? Could this have just been a typo on Carter's end? Anyway's, I'm just window shopping and salivating after a guitar that I can't afford but would love to hear from the Gibson experts on here. BTW, for those that may be interested, it seems to be listed at a pretty good price in comparison to other Banner's I've seen listed. https://cartervintage.com/collection...n-j-45-c1944-2 |
Yes. 1 3/4" is the most common but you can find banners with anything from just under 1 11/16" to 1 7/8".
|
The refinish and non-original parts are the reason it’s more affordable....
|
Each neck was hand-carved, so some variation is to be expected.
The other thing to consider is the profile of the neck itself. Wartime Gibsons have seriously beefy necks, The beefiest are from 1943-44 in the era of no truss rods, like this ‘44. What interests me is why someone would install a larger, incorrect bridge and pick guard. Are they correcting for a bellying top and some serious pick rash? |
All times are GMT -6. The time now is 03:37 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum