The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Electric Guitars

Reply
 
Thread Tools
  #1  
Old 11-16-2017, 04:48 PM
XYRN XYRN is offline
Registered User
 
Join Date: Aug 2011
Posts: 1,024
Default DIY $10 Pedal Board

As I've been getting more into electric guitar I've started buying effects pedals, and they're sprawling across the floor in my guitar room. (Edit: I don't know how to resize pics with this new host, sorry....)



I like making stuff so today I made a board to keep them tidy.
It doesn't fit all of them, but I can always make a second one as an add-on board.

Cheap is good, so I went to Menards to get supplies.



One of the pedals I bought used already had Velcro on the back, and it's been sticking to the carpet so I got the idea to cover the board in carpet, or buy a cheap rug. Even better, I found a stair step runner for three bucks.

I cut the board to length, about a half in longer than the rug on both sides.



Then I made a curved template from Kleenex box cardboard for the handle, which i could flip over so as to duplicate the curve for symmetry.



Next, using the template I marked the location for the holes for the handle, again, flipping the template for the other hole.





Prior to drilling the holes I clamped a piece of scrap to the work so the backs of the holes wouldn't tear out, spade bits are brutal for that.



To complete the handle I needed to remove the wood between the holes, that required taking apart my coping saw so I could get into the space, and I had to rotate the blade 90 degrees to saw along the lines.



The handle shape was cut with the scroll saw, the straights were finished up on the band saw.



Next, I used a router to give a nice round edge on everything.



Then I stained the board, avoiding the area under the carpet, so the adhesive would stick better.
After the stain dried I made a mask from wax paper, which I stapled to the board to prevent adhesive overspray onto the stained areas.



The spray adhesive has been applied, I also sprayed the back of the carpet. Then they dry prior to mating, it's a contact adhesive.



Oh, I didn't take a pic but I hung up a piece of plastic as a backdrop during spraying, and I wore gloves. That stuff is messy!

After I stuck the carpet onto the board I used a post stapler and further anchored the perimeter to the board. They are virtually invisible within the carpet pile.



And here is the initial configuration; I still need to buy some more 90 degree jumper cable and I'm sure I'll move pedals around, but that's the point of Velcro. And I've got three other devices right now that don't fit, so I'm likely going to make a second identical board.



I don't gig, so I don't really need a covered pedal case, just needed to keep things organized.
I think this fits the bill!
__________________
2011 Kennedy OM
2012 Kennedy Parlor
2012 Taylor GS-Mini (Mahogany)
2013ish Yamaha GL-1 "Guitalele"
2012 Martin OO-S "Podium Special"
c.1999 Cort ProCustom Strat-style
Reply With Quote
  #2  
Old 11-16-2017, 05:07 PM
KevWind KevWind is offline
Registered User
 
Join Date: Apr 2008
Location: Out West
Posts: 8,870
Default

Love the notion of you thread BUT Gotta find a way to resize the photos they are way way way too big !!!!

940 to 1040 pixel max is sufficient
__________________
" Peace cannot be kept by force. It can only be achieved by understanding." Albert Einstein
Enjoy the Journey.... Kev...



http://soundcloud.com/kevwind
Reply With Quote
  #3  
Old 11-16-2017, 09:30 PM
MBDiagMan MBDiagMan is offline
Registered User
 
Join Date: Nov 2017
Location: NE Texas
Posts: 151
Default

Nice job XY,
__________________
1969 Framus Solid Body Electric
1969 Schaller KV25 Amplifier
1997 Mexican Strat
2017 Les Paul Tribute Model
Bugera V22 Tube Amplifier
1969 Oscar Teller Classical
Martin DRS2
Yamaha FG700S
Reply With Quote
  #4  
Old 11-16-2017, 09:53 PM
XYRN XYRN is offline
Registered User
 
Join Date: Aug 2011
Posts: 1,024
Default

MBDM, thanks!
__________________
2011 Kennedy OM
2012 Kennedy Parlor
2012 Taylor GS-Mini (Mahogany)
2013ish Yamaha GL-1 "Guitalele"
2012 Martin OO-S "Podium Special"
c.1999 Cort ProCustom Strat-style
Reply With Quote
  #5  
Old 11-17-2017, 06:37 AM
Fractal Fractal is offline
Registered User
 
Join Date: May 2017
Posts: 28
Default

All I can see is the guitar pick....
Reply With Quote
  #6  
Old 11-17-2017, 08:50 AM
MikeBmusic MikeBmusic is online now
Registered User
 
Join Date: Aug 2013
Location: On the Mass/NH border
Posts: 4,636
Default

You need to resize the photos before you upload them!

Only $10? So you don't consider your time worth anything?
__________________
Mike

My music: http://www.reverbnation.com/mikebirchmusic

2017 Taylor 114ce-N
2012 Taylor 310ce
2011 Fender CD140SCE
Ibanez 12 string a/e
73 Epiphone 6830E 6 string (made in 71?)

72 Fender Telecaster
Epiphone Dot Studio
Epiphone LP Jr
Chinese Strat clone ($25!)

Kala baritone ukulele
Seagull 'Merlin'
Washburn Mandolin
Luna 'tatoo' a/e ukulele
antique banjolin
Squire J bass
Reply With Quote
  #7  
Old 11-18-2017, 11:37 PM
Jerry D Jerry D is offline
Registered User
 
Join Date: Mar 2014
Location: Birmingham, Alabama
Posts: 1,246
Default

As stated, resize before sending. These are unreadable.
__________________
Acoustic:
Taylor 314ce
Alvarez AP66SB
Yamaha LL16R A.R.E.
Fishman Loudbox Mini

Electric:
1968 Fender Thinline Tele
2016 Fender MIA American Standard Strat
1966 Fender Super Reverb
2016 Fender Champion 40
2015 Epiphone ES-339 Pro
Reply With Quote
  #8  
Old 12-02-2017, 01:11 AM
rono rono is offline
Registered User
 
Join Date: Dec 2009
Location: ottawa, IL
Posts: 3
Default

this is the best thread in the history of the interwebnets.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Electric Guitars

Thread Tools



All times are GMT -6. The time now is 07:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2000 - 2017, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=