The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Reply
 
Thread Tools
  #1  
Old 10-11-2017, 08:48 AM
pheumiller's Avatar
pheumiller pheumiller is offline
AGF Sponsor
 
Join Date: Nov 2002
Location: Weaverville, North Carolina
Posts: 582
Default Incoming 2017 Tippin Al Petteway Crescendo

Paint us pink with excitement: we've got another Al Petteway signature model on the way from one of our all-time favorite builders, Bill Tippin! As you know, Al's left his mark on virtually every steel string demo we've ever recorded, but this special Crescendo actually bears his physical mark on its own special label below Bill's. We supplied the Brazilian Rosewood for the back and sides (it was a great excuse to sift through our secret stash and dream of future builds), and Bill supplied the rest. We'll document the build process throughout the various stages, so stay tuned for updates! See immediately below for a link to another Al Petteway signature model Bill built for us in the past.

https://www.dreamguitars.com/shop/ti...-petteway.html

Back and sides – DG’s personal Brazilian Rosewood
Top – Swiss Moonspruce
Scale length – 25.5”
Lower bout – 15 1/2”
Body length – 20 3/8”
Body Depth – 4 5/16”
Standard nut width – 1 3/4”


Side assembly in the Crescendo mold clamped to a bench.


Close up of Tippin's spreaders which keep the sides firmly squared up agains the inner rim of the mold.


Gluing the back to the side assembly: 30 clamps.


Binding strips, dark Brazilian Rosewood against even darker Brazilian Rosewood.


Bill's spliced some textured sapwood between Abalone strips for an endgraft with an organic flair.


Bill's iconic soundport, beveled to reveal the reinforcement layers underneath.


A Ryan-style arm bevel has here been routed to receive bindings. Installing a bevel is an intense feat of engineering, one which Bill has mastered handsomely over the years. Bill sourced this fine example of Moonspruce from Switzerland.

10/11/2017 Update:








From Bill: "The heel to body joint has been beveled back to allow more access to the extension frets (upper register) also the heel profile has been swept in some providing no edges to interfere with access in the cutaway."


Koa arm bevel to match the other Koa appointments




Fossil Walrus tusk surrounded by Mother of Pearl sparkle, Blue-Green Paua trim
__________________
http://www.dreamguitars.com
Reply With Quote
  #2  
Old 10-11-2017, 01:36 PM
Rwpierce Rwpierce is offline
Charter Member
 
Join Date: Aug 2013
Location: Flower Mound, Texas
Posts: 194
Default

Wow, that's going to be a beautifully amazing guitar!!
Reply With Quote
  #3  
Old 10-12-2017, 07:59 AM
Monk Monk is offline
Registered User
 
Join Date: Aug 2004
Location: Berkeley, California
Posts: 7
Default Yowzah!

Eye-candy and sonic alchemy, too.
Reply With Quote
  #4  
Old 10-12-2017, 09:39 AM
Nemoman Nemoman is offline
Registered User
 
Join Date: Dec 2010
Location: N. California
Posts: 1,319
Default

Unique take on the arm bevel with the use of different woods for the bevel and the binding.

Very nice!
__________________
Brazzie (Rio Lava)--2015 Stehr Auditorium (Adirondack / BRW)
Tigger--2013 Stehr Auditorium (Carpathian / Oregon Myrtlewood)
Melee--Razo 19 OM (German / Malaysian)
Dana--1999 Bourgeois OM (Sitka/EIR)
Nemo--2009 Taylor Custom GS (Sinker/Macassar) GONE, but still in the family
Reply With Quote
  #5  
Old 10-12-2017, 05:36 PM
Diamondave's Avatar
Diamondave Diamondave is offline
Charter Member
 
Join Date: Jan 2006
Location: Venice CA
Posts: 1,988
Default

Looking tasty...!
__________________
onedayatatime
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Thread Tools



All times are GMT -6. The time now is 11:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright ©2000 - 2017, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=