The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Reply
 
Thread Tools
  #46  
Old 01-06-2017, 10:18 AM
Rudy4 Rudy4 is offline
Registered User
 
Join Date: Oct 2012
Posts: 1,085
Default

Hi redir,

Yes, the same thing. Nomenclature may vary but the need to correct for a band saw's tenancy to cut at an angle slightly different than parallel to the table guide slots is necessary. We're on the same page.

A brand new un-used blade will often cut parallel to the table slots, but that changes as soon as there's even a small amount of wear to ether side of the blade teeth. It's something that we more or less intuitively deal with as we become familiar with the eccentricities to the use of most any tool.
Reply With Quote
  #47  
Old 01-06-2017, 10:27 AM
tadol tadol is offline
Charter Member
 
Join Date: Aug 2008
Location: Berkeley, CA
Posts: 2,350
Default

Dont forget the importance of blade tension!!
__________________
More than a few Santa Cruz, Pattersons, a Larrivee, and a few Sexauers!!
Reply With Quote
  #48  
Old 01-08-2017, 07:45 AM
MC5C MC5C is offline
Registered User
 
Join Date: Mar 2016
Location: Tatamagouche Nova Scotia
Posts: 336
Default

There is a saw down the street from me in an closed sawmill that is around 15 feet tall and has at least a 4" wide blade. I actually thought about it for a minute or two... I'm like "well, there's three phase power on the street, I could get it pulled in and the ceiling is high enough..."

Not mentioned often enough is selection of blade. The wrong blade, of any quality on any saw, won't do the job properly. I don't know much, not having much experience with a band saw, but when I got a low tooth count (4 tpi) 1/2" wide blade, my skill at resawing improved by an order of magnitude! The theory is that a low tooth count, big toothed blade simply makes a space for the sawdust to go, and lets the saw work a whole lot easier. Worked for me. So do a little research about how to choose a blade for the task at hand, and don't make my mistake of thinking there is such a thing as a do-all combination blade. You have to just about completely re-set-up the saw each time you change the blade, and yes, they do wear out...
__________________
Brian Evans
1935 Dobro model 25 resonator
1943 Paramount (made by Kay) mandolin
1946 Epiphone Zephyr electric archtop
1957 Hofner Senator archtop
1962 Gibson Melody Maker electric
1963 National Dynamic lap steel
1996 Landola jumbo
1998 Godin Artisan TC electric
2003 Epiphone SG electric
2010 GoldTone PBR-CA resonator
2015 Evans electric archtop
2016 Evans archtop
Reply With Quote
  #49  
Old 01-08-2017, 10:55 AM
Bruce Sexauer's Avatar
Bruce Sexauer Bruce Sexauer is offline
AGF Sponsor
 
Join Date: Jan 2009
Location: Petaluma, CA, USA
Posts: 4,238
Default

Fortunately, setting up a bandsaw is only a couple of minutes work, as I will demonstrate at today's previously mentioned NCAL meeting in my shop. Unfortunately, the weather outside is frightful, and I suspect that may impact attendance.
__________________
Bruce
http://www.sexauerluthier.com/
Reply With Quote
  #50  
Old 01-15-2017, 04:20 PM
SnowManSnow SnowManSnow is offline
Registered User
 
Join Date: Feb 2015
Posts: 358
Default

Quote:
Originally Posted by Bruce Sexauer View Post
Fortunately, setting up a bandsaw is only a couple of minutes work, as I will demonstrate at today's previously mentioned NCAL meeting in my shop. Unfortunately, the weather outside is frightful, and I suspect that may impact attendance.


Bruce...
Are these
Sessions available online?


Sent from my iPhone using Tapatalk Pro
Reply With Quote
  #51  
Old 01-16-2017, 09:05 AM
Ned Milburn's Avatar
Ned Milburn Ned Milburn is offline
AGF Sponsor
 
Join Date: Feb 2011
Location: Dartmouth, NS
Posts: 2,871
Default

Quote:
Originally Posted by SnowManSnow View Post
Bruce...
Are these
Sessions available online?


Sent from my iPhone using Tapatalk Pro
I'm not Bruce as you can tell, but here's a nice video for you:

http://www.thewoodwhisperer.com/vide...-setup-tuneup/
__________________
----

Ned Milburn
www.HandCraftedGuitars.ca
NSDCC Master Artisan
Dartmouth, Nova Scotia
Reply With Quote
  #52  
Old 01-16-2017, 11:15 AM
Bruce Sexauer's Avatar
Bruce Sexauer Bruce Sexauer is offline
AGF Sponsor
 
Join Date: Jan 2009
Location: Petaluma, CA, USA
Posts: 4,238
Default

Quote:
Originally Posted by SnowManSnow View Post
Bruce...
Are these
Sessions available online?


Sent from my iPhone using Tapatalk Pro
No one video'd at the NCAL meeting. There is talk however of setting up a regular system for getting that feature in the future, and since I just became president of the club it may well happen. Not promising, but I know who suggested it.
__________________
Bruce
http://www.sexauerluthier.com/
Reply With Quote
  #53  
Old 01-16-2017, 11:34 AM
tadol tadol is offline
Charter Member
 
Join Date: Aug 2008
Location: Berkeley, CA
Posts: 2,350
Default

I did record the presentation, but the audio is not great, and I have not had time to see if I can clean it up yet - If Bruce approves the final result, it will get posted -
__________________
More than a few Santa Cruz, Pattersons, a Larrivee, and a few Sexauers!!
Reply With Quote
  #54  
Old Yesterday, 04:04 PM
SnowManSnow SnowManSnow is offline
Registered User
 
Join Date: Feb 2015
Posts: 358
Default

Perhaps even a live stream Facebook video... that way it is automatically available for playback...!
Does NCAL have a FB page?? --- going to look now


Sent from my iPhone using Tapatalk Pro
Reply With Quote
  #55  
Old Yesterday, 04:07 PM
SnowManSnow SnowManSnow is offline
Registered User
 
Join Date: Feb 2015
Posts: 358
Default

All this being discussed I'm still contemplating which saw... i don't need a ton of resaw capacity ... just braces and such.. I don't see sawing tops and thing for a LONG time...

Again than you for all your input. It is greatly valued


Sent from my iPhone using Tapatalk Pro
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Thread Tools



All times are GMT -6. The time now is 08:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright ©2000 - 2017, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=