#1
|
|||
|
|||
Care and Feeding of CF guitar
Greetings. I posted awhile back about a wood top for an Emerald Balor. I wound up going 100% CF in blue instead, and am very happy with that choice. It's since arrived, and we are getting acquainted.
I'm wondering about how people take care of their CF acoustics. I know it's supposed to be impervious to weather, etc. BUT --do you do anything special to care for the finish? --is the truss rod tweak purely for player's preference or is it sometimes necessary when changing to a different brand of strings (with a different tension), or for other reasons? Etc etc. I'll post a NGD thread eventually but this will do for now. |
#2
|
|||
|
|||
My limited experience is that no truss rod adjustments have to be made between extra lights and mediums. Neither of my CF guitars seemed to notice the change. I sure did tho.....
__________________
Blackbird Lucky 13; Emerald X7 V3; Yamaha LS-TA; Yamaha SLG200; PRS Zach Myers; PRS SE Hollowbody Piezo |
#3
|
|||
|
|||
No truss rod adjustment necessary for different string brands/gauges in my experience. On my X7, I lowered the saddle, but didn't need any neck adjustment. My X20 came in perfect for my tastes. If you do find a minor tweak on the truss rod is necessary, I doubt you'll have to do it another time for string changes (or climate changes).
As far as taking care of the finish: I wipe my Emeralds down with a microfiber cloth after each session. If I find I have finger printed them, I use a barely damp microfiber, then dry it. I play the heck out of them and they still look like new. No other cleaning has been necessary... for full disclosure, I don't eat spaghetti or chili over the top of my guitars, and I'm a pretty average sweater. TMI? Again? I have been working on my "filter." Play that Emerald - enjoy that Emerald! I bet that blue is pretty! I'd know for sure if you wanted to post some photos. |
#4
|
|||
|
|||
It would help me know as well...thanks in advance... usually a 20 photo requirement ... but 10 will work for now.
__________________
YUP.... Emerald: X-20, Center hole X-10 (Maple) and X-7 (redwood), Spalted Chen Chen X 10 level 3, CA: Early OX and Cargo McPherson: Early Kevin Michael Proto Some wood things by Epi, Harmony, Takamine, Good Time, PRS, Slick, Gypsy Music, keyboards, wind controllers.. etc |
#5
|
|||
|
|||
I don't have an Emerald. Mine's a RainSong Concert OM.
Can't speak to neck question.... I've never changed gauges or had any other reason to adjust the truss rod. From what I know of the stiffness of carbon fiber, though, I doubt there would be any change if you went up or down a gauge. But as far as cleaning it goes, I've never needed anything but Windex and a paper towel. There are a couple of products that RainSong recommends: "To clean your RainSong use a high grade, non-abrasive automotive detailing product such as Meguiar's Mirror Glaze Final Inspection 34 or Quik Detailer (www.meguiars.com), and a soft all-cotton cloth. Remember to inspect the rag to make sure nothing abrasive is on it.Other than that, your RainSong requires very little. Just make sure you play it and have fun!" Obviously, yours isn't a RainSong, but I have to assume the resins used to bind the carbon fiber cloth are very similar. Hope this helps. |
#6
|
||||
|
||||
Most CF guitars will have a gloss polyurethane finish. Automotive and marine finish products work well as properly applied.
__________________
Doerr Trinity 12 Fret 00 (Lutz/Maple) Edwinson Zephyr 13 Fret 00 (Adi/Coco) Froggy Bottom H-12 (Adi/EIR) Kostal 12 Fret OMC (German Spruce/Koa) Rainsong APSE 12 Fret (Carbon Fiber) Taylor 812ce-N 12 fret (Sitka/EIR Nylon) |
#7
|
|||
|
|||
I believe Emerald Guitars have a polyester finish.
__________________
Emerald 2016 X7 2017 X20 2018 X30 And four all laminate wood acoustic guitars |
#8
|
|||
|
|||
Yeah, very curious about those Balors!
About the CF cleaning... My GX lives inside, outside, parked under a tree, played in hot weather (sweat), gets beer spilled on it, covered with pine pollen, whacked around by my neighbors 2 and 3 year olds... can't say it looks brand new, but close. I never wipe it down after playing. Maybe before, if there's alot of pollen or dust around. I do clean it a bit during string changes. Micheal from MacNichols said to use Wizards Mist-N-Shine for Motorcyles and a micro fiber cloth. That's what I use, no polish. No truss rod on the GX and no need for one. |
#9
|
|||
|
|||
my choice
__________________
vANCe 1976 Martin D-28(original owner) 1992 Taylor 420(original owner) 2012 RainSong H DR 1000(original owner) 2011 Gretsch Anniversary Model(original owner) Mandolin- 1920's A-Style (unknown brand) Mandolin- Fender Mandostrat Banjo -2016 Gold Tone EBM-5+ Fender 2013- Strat |
#10
|
|||
|
|||
Doesn't Windex have Ammonia in it ? I wouldn't use it, but that's just me, no bad experience or anything. I used to do stained glass and I know you are not supposed to use it on that type of glass.
__________________
John |
#11
|
|||
|
|||
Michael Constantine from Room 222? And a million movies and TV shows too??
__________________
YUP.... Emerald: X-20, Center hole X-10 (Maple) and X-7 (redwood), Spalted Chen Chen X 10 level 3, CA: Early OX and Cargo McPherson: Early Kevin Michael Proto Some wood things by Epi, Harmony, Takamine, Good Time, PRS, Slick, Gypsy Music, keyboards, wind controllers.. etc |
#12
|
|||
|
|||
Quote:
That pic was from "My Big Fat Greek Wedding" (well not mine)
__________________
vANCe 1976 Martin D-28(original owner) 1992 Taylor 420(original owner) 2012 RainSong H DR 1000(original owner) 2011 Gretsch Anniversary Model(original owner) Mandolin- 1920's A-Style (unknown brand) Mandolin- Fender Mandostrat Banjo -2016 Gold Tone EBM-5+ Fender 2013- Strat |
#13
|
|||
|
|||
Not so much a problem on the stained glass (which is about as stable as any other, say, window, glass. Rather, it is an issue with the metals - reaction with lead, scratching (in case of abrasive window cleaners) the patina on the metals, and like that. I suspect there is no particular problem with Windex on the CF guitar but I prefer other cleaners anyway...
|
#14
|
|||
|
|||
Quote:
__________________
John |
#15
|
|||
|
|||
I've used nothing but Windex on mine for a couple of years now, and I haven't had any problems at all.
Room 222? That's a deep cut. |