Loud HUM through PA speaker

[YamahaGuy]

Originally Posted by jkilgour2000

I'm going to try the XLR ... I had forgotten about that! Hopefully this will be the fix .. I'll report back

Good luck.

[jkilgour2000]

Update: I tried the XLR connection, and it didn't help with the hum. I also tried plugging in the A3 to the same outlet as the PA, still no joy.

However, going through a mixer, the hum is gone. Strangeness.

As i said, the hum is only present with my Taylor with the ES2, and when the AMP is running off AC. On battery it's fine -- so I'm not going to waste anymore energy worrying about it. It is what it is.

Thanks everyone for your input!

[rmp]

However, going through a mixer, the hum is gone. Strangeness.


that is exactly what we noticed with my buddies Tak. in some mixers, same guitar is quiet as a mouse, in the one we used normally, it was there.