#1
|
|||
|
|||
What parts of a cf guitar are not cf?
Obviously the tuners, strings, pickups and frets aren't. What about the saddle, nut, fretboard, etc.? And does it vary by manufacturer/model?
Thanks
__________________
Emerald Opusx20 acoustic-electric w/Baggs Lyric pickup Martin D12X1AE 12-string Gold Tone AC-6 6-string acoustic-electric banjo |
#2
|
|||
|
|||
I know that Emerald and Rainsong use Graphtech nuts and saddles, while CA uses a "proprietary material" for those.
|
#3
|
|||
|
|||
At the risk of showing my ignorance, the frets couldn't be CF, could they?
__________________
Emerald Opusx20 acoustic-electric w/Baggs Lyric pickup Martin D12X1AE 12-string Gold Tone AC-6 6-string acoustic-electric banjo |
#4
|
|||
|
|||
Well I know a lot of the rainsongs have a lot of glass in their bodies, not jsut carbon. I'm not sure about the other brands, my L13 is more on the heavier side than what I would expect for pure carbon fibre, so I was thinking the same, despite not finding anything on the website.
The bridge and fretboard of blackbirds are made of "micarta" which is a brand name, so I don't knwo what it really is. |
#5
|
|||
|
|||
I could be wrong, but I think Emerald and CA use stainless steel, while Rainsong uses nickel silver.
|
#6
|
|||
|
|||
Yes, Emerald and CA both use stainless steel frets. I'm pretty sure Blackbird does, too. Rainsong uses standard nickel frets.
|
#7
|
|||
|
|||
Which is why in the end I went with a Lucky 13 instead of a Rainsong. I still have a Rainsong BI that haunts my dreams though.
|
#8
|
|||
|
|||
The fingerboard and bridge on RainSong graphite guitars are a composite material and not carbon fiber.
Regards, RainDance (aka SpruceTop when not carbonated)
__________________
Martin HD-28 Sunburst/Trance M-VT Phantom Martin D-18/UltraTonic Adamas I 2087GT-8 Ovation Custom Legend LX Guild F-212XL STD Huss & Dalton TD-R Taylor 717e Taylor 618e Taylor 614ce Larrivee D-50M/HiFi Larrivee D-40R Blue Grass Special/HiFi Larrivee D-40R Sunburst Larrivee C-03R TE/Trance M-VT Phantom RainSong BI-DR1000N2 Emerald X20 Yamaha FGX5 Republic Duolian/Schatten NR-2 |
#9
|
|||
|
|||
In an attempt at being thorough, I'll add that my Emerald has a sterling silver logo on the headstock and a paper label visible through the soundhole. And let's not forget strap pins and electronics.
|
#10
|
|||
|
|||
The mother of pearl sharks on my Shorty SG-FLE.
|
#11
|
|||
|
|||
I have non CF dust on mine...hey....I am in a desert darn it.
__________________
YUP.... Emerald: X-20, Center hole X-10 (Maple) and X-7 (redwood), Spalted Chen Chen X 10 level 3, CA: Early OX and Cargo McPherson: Early Kevin Michael Proto Some wood things by Epi, Harmony, Takamine, Good Time, PRS, Slick, Gypsy Music, keyboards, wind controllers.. etc |