|
|
#1
02-12-2018, 02:24 PM
|
|||
|
|||
Where to get truss rod nut?
Anyone know where I can get a truss rod nut for a Yamaha fg 180 nippon gakki, pre-1981 model? (ie, access in the headstock).
The nut is so chewed up, it makes it really challenging to get a screwdriver to stay in the slot. Thanks.
__________________
Taylor 114e, Little Martin LX-1, Cordoba 20TM-CE Tenor Uke, Oscar Schmidt OU2 Soprano My (old) tunes 
|
|
#2
02-20-2018, 01:45 AM
|
|||
|
|||
|
Its actually a 5/16 external nut, dont use the screwdriver slot, just use a normal 5/16 socket and all should be good
Steve
__________________
Cole Clark Fat Lady Gretsch Electromatic Martin CEO7 Maton Messiah Taylor 814CE
|
|
#3
02-20-2018, 05:59 AM
|
|||
|
|||
|
5/16" or 8mm. Either should work.
|
|
#4
02-22-2018, 01:26 PM
|
|||
|
|||
|
This wrench works. https://www.allparts.com/LT-4958-000...ch_p_2228.html Only $5 plus shipping. It's 0.20" longer than the vintage Yamaha wrench but it just fits in the pocket.
|
