#1
|
|||
|
|||
Best way to measure/draw neck profile for a luthier?
Hi all
I need to describe my favourite neck profile for a custom build. I will probably try copy my current guitar. What methods are best so I can communicate the neck size and profile over email? Thanks |
#2
|
|||
|
|||
Quote:
Buy a profile gauge, make patterns of the profile in 3 locations, take caliper measurements of the width & depth of the neck. Mail it to him. What will a couple of days delay mean in the scheme of things? Nothing. Here's the item that will make it come out as close as possible: https://www.homedepot.com/p/M-D-Buil...FZJDNwodX0wJtA HE |
#3
|
||||
|
||||
That is exactly what I did, got one of those gauges at the local hardware store for a few bucks. I did a profile at the 3rd, 5th fret I think 12th fret. Trace that onto construction paper did 3 each and sent the construction paper cutouts to the luthier and that's what they used to make the neck and it came out perfectly.
__________________
PS. I love guitars! |
#4
|
|||
|
|||
Quote:
I took the template from my 1930 Gibson TGL-5, but the reality is that unless the body is also the same shape/size/depth etc, there will be a perceived difference in feel. Fret size also counts, as does 12th fret width, etc. Howard |
#5
|
||||
|
||||
Neck shape is vastly more subtle than most people realize. Tiny dimensional differences can be deal breakers for some people. As a tool for getting another persons ideal neck into their ball park, I have found overall width and depth dimensions at the 1st and 10th frets in combination with profile and shoulder descriptions to be more useful than any attempt at tracing a template.
|
#6
|
|||
|
|||
Best way to measure/draw neck profile for a luthier?
You can also use a guitar neck you like and have it replicated. Ie, an Olson profile, a taylor profile, etc. Most luthiers can replicate these.
Of course this only works if it's replicating a builder that is consistent and you don't have a more custom neck. |
#7
|
||||
|
||||
Quote:
Will you provide an example, please? Steve
__________________
Still crazy after all these years. |
#8
|
|||
|
|||
Wouldn't your luthier give you a guideline as to how and what measurements are needed?
|
#9
|
||||
|
||||
Good questions!
And a bunch of good answers already.
If you are dead set on replicating your fave, and why not? Have you considered sending your Luthier the one you love so he has it in hand while doing your new carve? I am doing just this with John Kinnaird for my upcoming build. And he did my fave carve on my former build! But he uses no CNC and every carve is a bit different. Of course you need to pack like crazy, insure up the wazoo and pray while shipping... Ameritage cases and DOUBLE boxing relieve some worries... And you need a couple spares! Tell your spouse. Good excuse to have a couple extras! Haha Hope you get just what you are after! Cheers Paul
__________________
3 John Kinnaird SS 12c CUSTOMS: Big Maple/Cedar Dread Jumbo Spanish Cedar/WRC Jumbo OLD Brazilian RW/WRC R.T 2 12c sinker RW/Claro 96 422ce bought new! 96 LKSM 12 552ce 12x12 J. Stepick Bari Weissy WRC/Walnut More |
#10
|
||||
|
||||
For instance: 1 7/8" at the nut, 2 5/16" at the 12 th fret, 54/64 thick at the 1st fret and 62/64 at the 10th fret, and a mild V (with a noticeable but not quite sharp transition) with a slight shoulder breaking onto the fingerboard.
This is a language everyone speaks, in measurements that anyone can make with a $20 plastic body veneer caliper. Plastic is hard to damage the finish with. |
#11
|
|||
|
|||
Quote:
Unless my client had some experience drawing, drafting, advanced woodwork knowledge etc. I be some what concerned about the accuracy of the template I was presented, two pencil lines can add up quick, and having a one dimensional representation may be deceptive...and well I can just envision a "but that's the exact size that you sent me" kind of thing One thing I do ask is if there are any factory guitars that they know and are comfortable with, this certainly can help steer one in the right direction as far as what the type of feel they are look for. I'm glad I make my own guitars because I had a bad hand injury long ago, and while I have complete function of my hand, I did loose some fingertip on my left middle finger, end result is I only feel comfortable playing necks that are as fat as a baseball bat, lol which I know most people don't like or want.So I think I;d have a hard time describing what I wanted shape/feel wise. The only professional I know of that likes fat necks is Steve Miller. Go figure
__________________
http://www.jessupegoldastini.com/ |
#12
|
|||
|
|||
Quote:
|
#13
|
|||
|
|||
Quote:
|
#14
|
|||
|
|||
My only experience with this to this point was sending my customer a profile gauge and a package of 5 minute epoxy.
He took the profile of his favourite neck at the 1st and 9th frets, locked the gauge down with the epoxy, and sent it back to me. No issues over transferring templates, and I had the exact pattern to work from. The cost of a pattern gauge, some epoxy, and postage. Steve
__________________
www.denvirguitars.com |
#15
|
|||
|
|||
Plaster cast.
__________________
Fred |