#1
|
|||
|
|||
Demo’d QSC K8 w/acoustic - no volume - why? . . .
I was at Guitar Center demoing a Fishman Sa220 and decided to A/B with the new QSC K.2 (8” pa speaker). This new model K8 has DSP with an acoustic preset. I was really impressed with the eq balance on the K8 with acoustic plugged direct, but there was just not much volume at all. Why?
Do I need an additional preamp when using specific powered pa monitors? I wouldn’t think so. The (2) 1/4” inputs were mic/line & hi-z/line. I tried both with no luck. I was using I believe a Taylor with active preamp to demo the speaker. I messed with all volumes and eq’s and such, but no luck. I assume at 2000 watts, this thing should crank. The Fishman SA220 next to the K8 was much louder, so it wasn’t an issue with the guitar I was using. Thanx for any help. - Rob New QSC K.2 (8”) https://www.qsc.com/live-sound/produ...k2-series-new/ |
#2
|
|||
|
|||
Was the Input A mic LED or Input B hi-z led lit? If not, the inputs were configured for a line level input signal.
hunter |
#3
|
|||
|
|||
Not sure.
I’d have to keep it in mind and check it out if I get back to the store. Thanx |
#4
|
|||
|
|||
The Hi-Z setting on input two should be loud!
|