#1
|
|||
|
|||
Playing a 12 String with only 6
Other than a wide nut (and probably looking dorkey), how do you feel about taking the octave strings off a 12 string?
I've been looking a few years for a Breedlove Maple jumbo (J350) and have run across a J350 12 string. I'm tempted to get it and try playing it as a 6 string. I haven't yet been able to wrap my mind around paying $10 to post a wanted ad for a J350. Ooops, posted this in wrong forum, thought I was in the general area. Last edited by jwellsy; 11-17-2017 at 10:11 PM. Reason: wrong forum |
#2
|
|||
|
|||
JW;
You're good here; There are a lot of 12 stringers on this forum and many carbon fiber enthusiasts actually own a wooden guitar or two. As to your question. I'm not the best source of information regarding 12 string guitars, but I've owned a few and I have played them as six string instruments. Normally I play nylon string guitars so I am used to a wider nut and found the 12 string works as a 6. My only reservation would be the possible loss of resonance. A 12 string is designed to take a lot of pressure and I suspect that when you remove 6 of those strings the remaining 6 may not resonate well. This is just a suspicion on my part. While you are here, you might want to take a look at the Emerald Guitar site and check out the 12 string guitars available in carbon fiber. In any event, good luck with your exploration. |
#3
|
||||
|
||||
Quote:
__________________
Tom '21 Martin D-18 Standard | '02 Taylor 814c | '18 Taylor 214ceDLX | '18 Taylor 150e-12 | '78 Ibanez Dread (First acoustic) | '08 CA Cargo | '02 Fender Strat American '57 RI My original songs |
#4
|
|||
|
|||
twelve to six conversion (and back)
I did exactly that years ago with my Seagull S12, just to experiment with a wider neck. I believe that the Seagull 12's are 2" wide at the nut, but don't recall for sure.
A new nut and medium gauge strings worked out pretty well. After about six months, I did convert it back to twelve strings by swapping the original nut back in. I am pretty happy with the 1.8" wide nut on my old S6. FYI, I used the first six tuners nearest the nut, and without notching the saddle, the strings were a just little bit off center with the fret board, but not unpleasantly so. BTW, the only reason the Seagull 12 ever went away was that I got a good deal on a Taylor 354-LTD. My wife put the Taylor in my hands while I was chatting with someone in the nice guitar room one day, and after a pause in the conversation, I suddenly realized that I has been playing a twelve-er! The dealer gave me a good price, and it went home with me that day -- and I still have it 16 years later. Once I have more bonding time with my new Emerald X20-12 that arrived this past week, the Taylor may go up for sale soon. |
#5
|
|||
|
|||
when I did that (at the time I was playing a converted 12 for instructional purposes) I felt I was playing a classical guitar because of the width of the neck.
|