#1
|
||||
|
||||
Cutaway Flattop for Jazz Chord Melody: Seeking Suggestions & Some Questions
Hi,
I have been considering buying a new acoustic. I have been playing a Martin M-38 for the last 20 years. It is a great instrument, but I struggle with passages in pieces above the 12th fret. I also have an acoustic archtop; a Heritage Sweet 16 which is obviously easier to play these pieces on. I play mostly chord melody arrangements of jazz standards. These arrangements have passages that can be lush, and single line work that can be dynamic. I play solo with both a flat pick and with my fingers. I was originally thinking about a Selmer style instrument, but I really don't play that manouche style and it seems far less versatile instrument. I also realized that something like a Dupont costs as much as a fine flat top. Why not find a flat top that allows me upper fret access and would be good for this style of play. I am now thinking about a Venetian cutaway OM sized instrument. I like a smaller body for comfort. I want an instrument ~<$5,000 price range. Some questions for the forum: 1)Would a rosewood or mahogany body be better suited for this instrument? 2)What type of spruce top (Sitka, Adirondack or Engelmann) should I consider and why? 3)In terms of makers I was thinking of a number of smaller established manufacturers like Bourgeois, Collings, Goodall or Santa Cruz or alternatively have the Martin Custom Shop make me an instrument. Any suggestions between these or other suggestions? Thanks, Bob
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings… |
#2
|
|||
|
|||
I just play jazz, my very best flattop for that application is my Goodall RGCC which is a roseswood GC cutaway with a master Engelmann soundboard. My everyday guitar for jazz is a Taylor GS7 cedar/rosewood, although I also liked a GS5 cedar/mahogany I had a lot. I also find the GS neck very comfortable for jazz. They can be ordered with a cutaway, and for the price I think they are a great value. Best of luck.
|
#3
|
|||
|
|||
I'd recommend athat you look at a cedar top if you like a mellow tone. I have a really nice Takamine cutaway acoustic electric with a cedar top and lacewood body. Played through an electric amp, it get a great jazz tone.
On the other hand, Gabor Szabo used to make great music on a Martin D-45: http://www.youtube.com/watch?v=Xz0zYA_12og Sorry about that previous link. I didn't know that was still on my clipboard. Last edited by The Old Gaffer; 02-22-2012 at 04:46 PM. |
#4
|
|||
|
|||
I am awaiting a new Taylor 812ce with a western red cedar top, rosewood body and sides, a wood combination which I ordered for exactly the same reason you have posted. Up to now I've played nothing but jazz and bossa, so I just like a warmer, fatter tone. Since I don't have it yet, I can't testify to its sound. However, I did play a Taylor 714ce with a cedar top/rosewood body in a store and it was my favorite among all the acoustics, played both acoustic and amplified.
But why not get a good jazz archtop acoustic/electric?
__________________
1976 Guild X-175 Manhattan Ibanez George Benson 2012 Taylor 812ce on order |
#5
|
|||
|
|||
Collings SJ cutaway, maple back/sides neck, sitka, german or adi top. There are some out there used. Fits your description to a T!
|
#6
|
||||
|
||||
I have a Heritage Sweet 16 already
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings… |
#7
|
|||
|
|||
Macaferri style guitars are far more versatile than you would think.
Although pigeonholed nowadays in gypsy jazz, they weren't originally designed for that. And you could well find modern copies satisfying for your purpose, specially equipped with a magnetic PU. For much less than 5000. Not at all the same as an archtop. As an example, here is my (arguably cheap) Gitane D-hole with a Fishman : http://www.youtube.com/user/batzic#p/u/26/nIsaK0AortA http://www.youtube.com/user/batzic#p/u/29/Ft6CUs7k6Eg Strange, but after staying in the case these last two years (new guitars to fall in love with, you know...), I pull it out yesterday, and... great guitar. I have some new tunes that fit it very well. I'll YouTube them in a few day. I must find strings for it. Last time, I put extra lights for a test. No good. |
#8
|
|||
|
|||
Quote:
Here's Oscar tearing it up on the national tricone if anybody is interested http://www.youtube.com/watch?v=6yaA7_xNkJs |
#9
|
|||
|
|||
Tricones, too, are also incredibly versatile. Not just for sliding blues. As the other type of resonators BTW (biscuit and spider)
And some modern models have a cutaway. I do play a tricone (and a biscuit cone), also : http://www.youtube.com/user/batzic#p/u/17/oQHGHMJaWfA http://www.youtube.com/user/batzic#p/u/16/qPkoS3iKLVY http://www.youtube.com/user/batzic#p/u/10/fREL4WgEqbo What I love in them, as in macaferri guitars, is the very fast response of the instrument. A X-braced flat top don't do that. Those are fine guitars to fingerpick. Very "precise" guitars (if that means anything) BTW, thanks for the mention of Aleman. Not well known these days, but what a player. And what a career... |
#10
|
|||
|
|||
I have a 6 month old Goodall Grand Concert (James asserts that his GCs, OMs, and OOOs are the same size...); mine is a redwood top with mahogany, and it is EXACTLY what you are wanting... you can NOT have mine!
I don't know about the <$5k figure, not for a new order - unless you go for one of James' "Aloha" models and then added the cutaway and the redwood top as an upcharge. The Aloha models are NOT something inferior, just fewer of the appointments that his full price models have... The redwood top gives an IMMEDIATE response, and a warm clear tone; it's captivating, actually... I still get entranced by the sound of the guitar and get distracted from the song I'm playing! VERY dynamic and sounds equally good played softly or strongly. I'm sure that the same instrument with a spruce top would be wonderful, but for my playing (flat pick/fingers - a hybrid mishmash) the redwood is perfect. I played a guitar built by Mark Angus (the Guitar Shoppe, Laguna Beach, CA) for over 30 years before this one; my Angus was maple and spruce w/ a Florentine cutaway (the Goodall has a Venetian cutaway)... and it served me very well all those years. Basically the shape/size of a Guild F-40, similar to most builders Concert Jumbo size... it, too, excelled at the tone/playing manner to which you allude... So, something curvy, not a dreadnought... a CJ would have more bass, but the GC is not lacking, in that department either... Funny, melody chording seems a lot easier on my 175 than either of my two acoustics; I'm pretty sure the nut width is narrower on the 175. Do you have a preference for the width of the nut/neck? You're looking at a lot of great instruments... Good luck on your choice!!! play on......................................> John
__________________
"Home is where I hang my hat, but home is so much more than that. Home is where the ones and the things I hold dear are near... And I always find my way back home." "Home" (working title) J.S, Sherman |
#11
|
||||
|
||||
Some potential candidates: Bourgeois, Collings & Santa Cruz
Hi,
Thanks for your responses. I did a little looking around the internet and without playing instruments, some that seem like they might fit the bill are:
Thanks, Bob
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings… |
#12
|
|||
|
|||
Quote:
__________________
Ibanez AC240-OPN Breedlove Discovery Concert SB |
#13
|
|||
|
|||
Quote:
Bourgeois Vintage OM Madi/Adi: I currently own this guitar, it has a comfortable neck profile and great tone. For me the neck profile is good, but not quite as good as the Taylor GS for jazz. I play the Goodall and Taylor much more but I do like the guitar. Collings OM-2H: I had the deep body version of the OM-2H, the neck profile was a shallow V which I thought was not ideal for jazz. The tone was good but I find Collings a bit overbuilt and consequently not as responsive as some others. Santa Cruz Standard OM: The neck profile was good and the guitar very responsive, of the three you listed maybe the best for jazz followed by the Bourgeois (which is the only one of the three I still have). The problem with the Santa Cruz was the neck finish was sticky which has been noted with Santa Cruz by others. I am not a fan of Nitro in general but that one's stickness was in the end a deal breaker for me. I do sense you want to avoid "mainstream" guitars by your list. but I would encourage you to go out and try some like the ones I mentioned. Enjoy the search. |
#14
|
|||
|
|||
I'd heartily recommend you contact Eric Skye, a member on this forum (min7b5 is his user name). Not only is he an incredible, dynamic player who has found a distinct voice on his instrument, he's also a gear head who has never failed to be anything but helpful to anyone who has ever asked him a question- pithy or otherwise.
His signature Santa Cruz model is a 00 Adi/Cocobolo that is the Ferrari of smaller-bodied guitars. Focused, responsive and with plenty of guts and gumption, too. Good luck in the search!
__________________
Formerly "disguiseglasses" |
#15
|
||||
|
||||
I am totally open to suggestions
I am happy to hear suggestions. There is nothing wrong with mainstream builders. A Martin or Taylor might be fine as well.
:-)
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings… |