#1
|
|||
|
|||
Martin 000 -C tuners
Any one have any idea if the tuners or at least the plastic tuner buttons will interchange with anything else. The action of the tuners is not too bad - they are not Waverlies or anything - but to me, the plastic tuner buttons are just ugly. I'd like some ebony or even richlite buttons if I could find some to interchange with the stock ones. Any ideas?
|
#2
|
|||
|
|||
Martin 000C Nylon tuning machines?
I thought they were Gotoh 18 to 1 tuners, but I'm not positive.
Glen
__________________
Yamaha FG-375S Jumbo Martin DXME/D-35E/DC Aura/000-14 Custom/D-16E Custom/ 000C Nylon/0000-28HE/Concept IV Jumbo/00-16C/D-4132SE Gibson LP Deluxe/ES-347 TD/Chet Atkins CE Fender MIA Deluxe Strat Art & Lutherie 12-string Bellucci Concert Sigma CR-7 Recording King ROS-06 FE3/RPH-05 D'Angelico "New Yorker" New Masters "Esperance SP" Hermosa AH-20 “I never met a guitar I didn't like.” |
#3
|
|||
|
|||
They are Gotohs. Mine showed a lot of gear wear and I tried to replace them. I bought Sloan ' s from StewMac.
They do not fit. The bearing rollers are too long and will hit each other on a peg head with less than a 2" nut. StewMac took them back, no sweat. I was able to find an older, new set without the bearings...shorter rollers and they fit great.
__________________
Martin 0-18t tenor guitar Ode model 21 long neck banjo Zach Hoyt 10" baritone banjo/uke LoPrinzi model A baritone uke Kerry Bannister mahogany nui (big baritone) uke Kerry Bannister mahogany baritone uke Harmony baritone uke |