#1
|
|||
|
|||
Gibson 3% bridge pins-?
anybody know a source to replace the plastic Gibson bridge pins?
Looking for basic white bone(no dots) or black horn, 3 degree taper, i need to remeasure the shaft top and end. Having no luck finding these. slotted-stops below the skirt, my measurement is around .215 right under the skirt, but it varies between the pins from .210 on up to .220 so tonite i plan to sit down with the calipers and attempt to find the real measurement if possible-i think the pins vary a little from one to the other. and a truss rod cover, ebony, Gibson bell shape, 2 screw. thanks d Last edited by darylcrisp; 04-07-2011 at 07:22 PM. |
#2
|
|||
|
|||
Can't Bob Colosi set you up with those? Send him one...he'll replicate it.
__________________
Kopp Trail Boss - Kopp L—02 - Collings C10 Custom - Gibson J-200 Jr - Halcyon 000 - Larrivee 00-70 |
#3
|
||||
|
||||
I've got a set of bone pins that I bought for a Woody Guthrie SJ. I ended up selling the guitar and never used the pins. If you're interested let me know and I'll give you the dimensions.
Gary |
#4
|
|||
|
|||
Quote:
d |
#5
|
|||
|
|||
Quote:
thanks d |
#6
|
|||
|
|||
I've been asking myself the exact same question.
Wiling to change the plastic pins to Ebony on my Gibson L-1 |