|
|
#1
02-22-2017, 04:31 PM
|
|||
|
|||
Taylor with 1 7/8" Nut width
I wanted to see what Taylor acoustics with the 1 7/8" nut width is out there for sell.
__________________
"He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot 
|
|
#2
02-22-2017, 09:23 PM
|
||||
|
||||
Hmmmm
I seem to recall psaladis had a very NICE 90s 514? K14? With a 1 7/8" Nut.
Pete is a Nice guy and knows old Taylors. Best on your quest! Cheers Paul
__________________
4 John Kinnaird SS 12c CUSTOMS: Big Maple/WRC Dread(ish) Jumbo Spanish Cedar/WRC Jumbo OLD Brazilian RW/WRC Big Tunnel 14 RW/Bubinga Dread(ish) R.T 2 12c sinker RW/Claro 96 422ce bought new! 96 LKSM 12 552ce 12x12 J. Stepick Bari Weissy WRC/Walnut More
|
|
#3
02-23-2017, 12:59 AM
|
|||
|
|||
How about...
a Taylor 12-string 1 7/8 nut, in amazing original condition, from what many call the Golden Years of Taylor? It's listed in my signature. Thx
|
|
#5
02-23-2017, 09:07 AM
|
|||
|
|||
|
Of course, you can always order one from Taylor that way (through an authorized dealer).
You can also look at some older ones. In the early/mid '90s Taylor would occasionally find themselves with too many 12-string neck blanks (1-7/8) and would put them on Grand Concerts. This seemed to happen up until about '96. I know this because I bought a standard 812ce in '95 from a local dealer and after a couple weeks realized that the neck was wider than any of my 1-3/4...but I liked it a lot. So I called Taylor to get the scoop. I talked with TJ Baden for a good hour about it (and everything else, including the fact that they built my guitar on a Friday the 13th, how we prepped our nails for playing, etc). Anyway, it was common practice back then simply because they were still a very small shop doing a lot by hand (even though they had the CNCs, they were still figuring out how best to use them) and they would just work with what they had ready. HTH
__________________
-Steve 1927 Martin 00-21 1986 Fender Strat 1987 Ibanez RG560 1988 Fender Fretless J Bass 1991 Washburn HB-35s 1995 Taylor 812ce 1996 Taylor 510c (custom) 1996 Taylor 422-R (Limited Edition) 1997 Taylor 810-WMB (Limited Edition) 1998 Taylor 912c (Custom) 2019 Fender Tele
|
|
#6
02-28-2017, 11:29 PM
|
|||
|
|||
|
Quote:
https://reverb.com/item/4262995-tayl...ltd-2001-gloss I forgot to mention that I contacted Taylor with the SN and confirmed that it had a 1 7/8" nut width. Last edited by justonemore; 03-01-2017 at 07:31 AM.
|
|
#7
03-23-2017, 02:06 PM
|
|||
|
|||
|
Anyne else with a Taylor that has a 1 7/8" nut width? Would prefer a GA body.
__________________
"He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot
|
|
#8
10-15-2017, 04:17 PM
|
|||
|
|||
|
Back up top
__________________
"He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot
|
|
#9
10-15-2017, 04:21 PM
|
||||
|
||||
|
Elderly had a Chris Proctor at a decent price a couple weeks back....I was a little tempted
Yep - still there.... https://www.elderly.com/taylor-cpsm-...model-2000.htm
__________________
"One small heart, and a great big soul that's driving"
|
|
#10
01-14-2018, 03:07 PM
|
|||
|
|||
|
Back up top....
__________________
"He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot
|
