The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > General Acoustic Guitar Discussion

Reply
 
Thread Tools
  #1  
Old 03-06-2011, 01:37 PM
LionEyes LionEyes is offline
Registered User
 
Join Date: Jul 2008
Location: south shore of Lake Erie
Posts: 138
Default Bourgeois Finishes

Are Bourgeois guitars primarily nitro-laquer finished?
They aren't polyurethane are they? I know some of the newer
ones are varnish.

lp
Reply With Quote
  #2  
Old 03-06-2011, 01:41 PM
Brackett Instruments's Avatar
Brackett Instruments Brackett Instruments is offline
Registered User
 
Join Date: Nov 2003
Location: Grover NC
Posts: 5,158
Default

I'm pretty sure their standard finish is catalyzed urethane. I think they may be offering a Varnish option, but I'm not sure.
__________________
woody b politically incorrect since 1964
Brackett Instruments Handmade Acoustic Guitars.
Big companies build guitars for profit. We build them for musicians.
Reply With Quote
  #3  
Old 03-06-2011, 02:21 PM
Latif Latif is offline
Registered User
 
Join Date: Feb 2011
Location: Arcata, CA
Posts: 108
Default

I just got my first Bourgeois, a new OMC, and its catalyzed urethane. According to Dana's website he does offer a varnish option which I don't believe is nitro either. The finish looks as good and as thin as the nitro on my Sadowsky archtop and is as perfect as I've seen on any guitar.

Latif, newbie on this forum
Reply With Quote
  #4  
Old 03-06-2011, 05:22 PM
LionEyes LionEyes is offline
Registered User
 
Join Date: Jul 2008
Location: south shore of Lake Erie
Posts: 138
Default

What characteristics does catalyzed urethane have,
that are different than other finishes?
Reply With Quote
  #5  
Old 03-06-2011, 05:46 PM
epaul epaul is offline
Registered User
 
Join Date: Nov 2002
Location: Minnesota
Posts: 1,277
Default

A urethane finish is non-reactive. Non-reactive means the finish won't react with another substance, such as body sweat, certain vinyls, plastics, lotions, and chemicals such as DEET (all of which can react with a nitro-cellulose finish and compromise it)

Catalyzed just means something was used to make the finish dry quickly and truely. The finish could be UV-catalyzed (such as Taylor, Larrivee, Bourgeois, Olson) or chemically catalyzed, (Huss and Dalton and two-thirds of a Collings)

In addition to being non-reactive, a correctly-applied poly finish is not susceptible to finish checking when subjected to cold weather. (Taylor has tested their finish as good to -10 F).

I have a Bourgeois, and I regard its finish as superb (and sturdy, safe, secure, scintillating, satisfying, and sonically salubrious)
__________________
Paul

-You could just as well be hung for a sheep as a goat.
Reply With Quote
  #6  
Old 03-06-2011, 07:19 PM
LionEyes LionEyes is offline
Registered User
 
Join Date: Jul 2008
Location: south shore of Lake Erie
Posts: 138
Default

Are there very many guitar makers that use a urethane finish?
Reply With Quote
  #7  
Old 03-06-2011, 08:03 PM
epaul epaul is offline
Registered User
 
Join Date: Nov 2002
Location: Minnesota
Posts: 1,277
Default

Add Goodall to the non-nitro mix. James Goodall uses a catalyzed urethane.

The nicer Asian guitars are pretty much split 50/50 between poly/nitro. I believe Yamahas are poly, as are Guilds.
__________________
Paul

-You could just as well be hung for a sheep as a goat.
Reply With Quote
  #8  
Old 03-06-2011, 08:14 PM
nacluth's Avatar
nacluth nacluth is offline
AGF Sponsor
 
Join Date: Mar 2010
Posts: 1,393
Default

We use a Cat U finish. Though we've done nitro and varnish on request. Can't say enough good things about it.
__________________
Ryan
Kinnaird SJ - Walnut/Sitka

Kinnaird Guitars - from the oldest town in Texas
Reply With Quote
  #9  
Old 03-06-2011, 08:25 PM
Dr. Jazz Dr. Jazz is offline
Registered User
 
Join Date: May 2008
Location: Calgary, Alberta
Posts: 657
Default

Almost everyone has to use CU these days as the solvents in Nitro get the EPA all upset. With good reason, I might add.

I can tell you that Dana's varnish is worth every penny. As good as these guitars are with CU, they are an order of magnitude better with the Varnish. OK....... I exaggerate, but only a little. :-)
__________________
Mike MacLeod, Calgary
Reply With Quote
  #10  
Old 03-06-2011, 10:21 PM
LionEyes LionEyes is offline
Registered User
 
Join Date: Jul 2008
Location: south shore of Lake Erie
Posts: 138
Default

What improvements do varnish bring to the table?
Reply With Quote
  #11  
Old 03-07-2011, 04:47 AM
Brackett Instruments's Avatar
Brackett Instruments Brackett Instruments is offline
Registered User
 
Join Date: Nov 2003
Location: Grover NC
Posts: 5,158
Default

Quote:
Originally Posted by LionEyes View Post
What improvements do varnish bring to the table?
Varnish is more flexible (therefore more acoustically friendly) than most finishes. This tends to make a Varnish finished guitar sound more open. Varnish is a little bit softer so proper care is a must. Unlike Nitro Varnish won't crack or craze, and isn't prone to damage by stuff like vinyl, insect spray, sweat ect. Varnish is my standard finish. I don't know what Bourgeois' upcharge is for a Varnish finish, but Collings' upcharge is almost as much as my base price. Varnish is more time consuming to apply correctly than most other finishes so it's expensive in a production enviroment.
French Polish is really flexible too, but it's alot more fragile than Varnish.
__________________
woody b politically incorrect since 1964
Brackett Instruments Handmade Acoustic Guitars.
Big companies build guitars for profit. We build them for musicians.
Reply With Quote
  #12  
Old 03-07-2011, 05:02 AM
The Acoustic Music Co (TAMCO) UK's Avatar
The Acoustic Music Co (TAMCO) UK The Acoustic Music Co (TAMCO) UK is offline
AGF Sponsor
 
Join Date: Apr 2009
Location: Brighton UK
Posts: 1,607
Default

I have a Bourgeois Vintage Varnish Mahogany OM on order. I will report back when its here.
__________________
Trevor.
The Acoustic Music Co.
www.theacousticmusicco.co.uk
Luthier made guitars and mandolins from North America, TAMCO: Brighton UK.
Reply With Quote
  #13  
Old 03-07-2011, 09:10 PM
LionEyes LionEyes is offline
Registered User
 
Join Date: Jul 2008
Location: south shore of Lake Erie
Posts: 138
Default

I know the upcharge for varnish on a Bourgeois dreadnought was $1500.
Reply With Quote
  #14  
Old 03-08-2011, 12:27 AM
Dr. Jazz Dr. Jazz is offline
Registered User
 
Join Date: May 2008
Location: Calgary, Alberta
Posts: 657
Default

I have a 00 Varnish Bourgeoise that I picked up from the factory in October. Incredibly responsive.
__________________
Mike MacLeod, Calgary
Reply With Quote
  #15  
Old 03-08-2011, 07:53 AM
Tim McKnight's Avatar
Tim McKnight Tim McKnight is offline
AGF Sponsor
 
Join Date: Oct 2005
Location: Morral, Ohio
Posts: 4,684
Default

Quote:
Originally Posted by LionEyes View Post
Are there very many guitar makers that use a urethane finish?
I have used catalyzed urethane for the last 8 years. Prior to that I used nitro. Going from nitro to Cat U was one of the best moves I have ever made in regard to finishes. It is very durable yet flexible enough to move with the wood. {If} applied thinly it has not negative impacts on tone.

I should point out that one should not use the word POLY as a generic term because not all polys are equal or even comparable. Poly-ester finishes are what some of the OEMs are using and Taylor comes to mind. Its tricky to apply and the finish builds very VERY quickly. If you don't have much experience shooting it the finish can be applied EXTREMELY thickly because the finish has a much higher solids content. Thick finishes can kill the tone of a guitar but the plus side is the finish is as hard as concrete so its almost like armor plating the instrument. Polyester will not scratch easily nor will it dent as easily as a softer finish.

Poly-urethane is one step down the hardness scale from polyester. It offers good scratch resistance, moderate dent resistance as well as resistance to most chemicals on the planet.

Instrument grade finishes are NOT the same finishes that one can purchase at their local home improvement store. Just don't think that you can go down to Lowe's and pick up some polyurethane, furniture lacquer or spar varnish and expect it to work on a musical instrument.

Nitro is the next down the hardness scale.

Varnish is among the softest finishes that I have tested to date and I have been on a testing rampage as of late. My urethane product, that I had used, is no longer available because the manufacturer went out of business last year so I have been trying to find a suitable replacement. Varnish is one of the slowest finishes to reach full hardness and one must allow ample time between spraying sessions and prior to buffing. Varnish has good resistance to scratches but poor resistance to dings and dents. It can become temporarily softer if subjected to intense heat (ie left in a HOT car) but will regain its hardness after it cools. In my own tests down to 2*F varnish has not exhibited any signs of cold checking.

Varnish can react with rubber and plastics but seems less susceptible after it has cured for 30 days. Learned this the hard way ;( Some say that Varnish damps the tone but I have not noticed this on the instruments that I have tested it on. Some, but not all varnish, is photoreactive to UV light. It can yellow with age similar to nitro. Most acrylic varnishes have UV inhibitors and are water white while most short oil alkyd varnishes do not and many of those are more amber in color.

I have fallen in love with the rich organic look of short oil varnish. It seems to cosmetically enhance the beauty of wood like no other finish that I have experienced. It has a depth and clarity to it like no other. Sheen seems to vary from brand to brand as does final hardness and drying / cure times. The plus side is that it can be applied as thin or thinner than any finish I have tested. Its not impossible to end up with a final finish in the 1.5 to 2.5 mils range. On sample spruce test panels I was unable to measure the thickness of 3 coats with a micrometer! Crazy as it sounds but true.

Bottom line is there are no ideal perfect finishes. They all have their own unique idiosyncrasies that one must learn to deal with and share with the end user.
__________________
tim...
www.mcknightguitars.com

Last edited by Tim McKnight; 03-08-2011 at 08:02 AM.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > General Acoustic Guitar Discussion

Thread Tools



All times are GMT -6. The time now is 07:01 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright ©2000 - 2017, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=