The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > General Acoustic Guitar Discussion

Reply
 
Thread Tools
  #1  
Old 01-13-2011, 04:21 AM
kazzelectro kazzelectro is offline
Registered User
 
Join Date: Dec 2008
Posts: 262
Default Anyone have experience in laminating ivory piano keys to make saddles / nuts?

I came across a box of ivory piano keys. After a recent thread at this forum testing tusq, bone and ivory I am keen to try an ivory saddle. The ivory from the piano keys is very thin and I've read that in order to make a saddle you must laminate or glue the ivory strips together. Just wondering if anyone has done this and if so..what type of glue is used...as well as any other suggestions as too the process. On another note the grain or patterning on the ivory strips is gorgeous and it really saddens me that such a magnificent creature was butchered for this purpose.
Reply With Quote
  #2  
Old 01-13-2011, 04:53 AM
PWoolson PWoolson is offline
Registered User
 
Join Date: Sep 2007
Location: Wisconsin
Posts: 2,688
Default

I think the advantage of ivory would be negated by the amount of glue that you'd have in a lamination. Glue is very soft.
I've got a box of them from a piano that I re-keyed. I use them for shims but other than that, I think they are pretty worthless.
__________________
Paul Woolson
Reply With Quote
  #3  
Old 01-13-2011, 05:29 AM
hermithollow hermithollow is offline
Registered User
 
Join Date: Dec 2010
Posts: 204
Default

I've used superglue to glue them together. It dries pretty hard, one reason it is recommended for repairing worn nut slots. Sand the ivory lightly to remove any discoloration and if you are clamping it use UHMWPE plastic for cauls, as superglue won't stick to that material.
I think laminated ivory works about as well as "solid" ivory when glued with Cyanoacrylate (superglue).
Reply With Quote
  #4  
Old 01-13-2011, 05:40 AM
Kelly Kelly is offline
Registered User
 
Join Date: May 2003
Posts: 36
Default

Those old ivory keytops make excellent under-saddle shims.
Reply With Quote
  #5  
Old 01-13-2011, 06:14 AM
PWoolson PWoolson is offline
Registered User
 
Join Date: Sep 2007
Location: Wisconsin
Posts: 2,688
Default

Quote:
Originally Posted by hermithollow View Post
I've used superglue to glue them together. It dries pretty hard, one reason it is recommended for repairing worn nut slots. Sand the ivory lightly to remove any discoloration and if you are clamping it use UHMWPE plastic for cauls, as superglue won't stick to that material.
I think laminated ivory works about as well as "solid" ivory when glued with Cyanoacrylate (superglue).
While I'll agree that CA seems "pretty hard", it is much softer than the surface of Ivory. You'll lose energy in the softness of the glue, thus kind of negating the point of using Ivory.
That's not to say that it can't sound good. But it won't sound like a solid piece.
__________________
Paul Woolson
Reply With Quote
  #6  
Old 01-13-2011, 06:19 AM
wilstev wilstev is offline
Registered User
 
Join Date: Dec 2009
Posts: 1,197
Default

Quote:
Originally Posted by PWoolson View Post
I think the advantage of ivory would be negated by the amount of glue that you'd have in a lamination.
This is what I was thinking. Sort of like laminated Brazilian rosewood would no longer have the tonal qualities of the real stuff.
Reply With Quote
  #7  
Old 01-13-2011, 06:50 AM
Bill Pillmore's Avatar
Bill Pillmore Bill Pillmore is offline
Charter Member
 
Join Date: Aug 2008
Location: Asheville, NC
Posts: 379
Default ivory key tops

Piano tuners don't use ca glue to re-glue ivory key tops because it shows through as non white. If that doesn't bother you then I think you would have a lot of glue - might be nice for decoration. I recovered a set of keys with the preferred plastic tops once and the owner wanted the old ivory key tops buried so they wouldn't be recycled.
__________________
Bill
http://www.billpillmore.com
Favorite Guitars
Woodson LG
Bashkin SJ-12
H&D 00-SP Cedar
Chris Larkin ASAPJM

For Sale
German Albert & Muller Parlor http://www.billpillmore.com/AM.html
Everett Celona http://www.billpillmore.com/Celona.html
Reply With Quote
  #8  
Old 01-13-2011, 07:27 AM
riorider's Avatar
riorider riorider is offline
*mahoganut*
 
Join Date: Feb 2008
Location: Central Rural Oklahoma, off old Route 66
Posts: 6,955
Default

They might make nice picks...
Reply With Quote
  #9  
Old 01-13-2011, 07:37 AM
kazzelectro kazzelectro is offline
Registered User
 
Join Date: Dec 2008
Posts: 262
Default

Quote:
Originally Posted by Bill Pillmore View Post
Piano tuners don't use ca glue to re-glue ivory key tops because it shows through as non white. If that doesn't bother you then I think you would have a lot of glue - might be nice for decoration. I recovered a set of keys with the preferred plastic tops once and the owner wanted the old ivory key tops buried so they wouldn't be recycled.
Bill..love the sentiment. I may just bury the whole lot. I've been hiding my guilt since I've acquire these keys.
Reply With Quote
  #10  
Old 01-13-2011, 07:39 AM
hermithollow hermithollow is offline
Registered User
 
Join Date: Dec 2010
Posts: 204
Default

Hi Bill,
When Ivory is cut thin it is translucent, Ca is clear. If you used it to glue the keytops to the wooden keys the wood would show through. That is why old pianos often use a glue that is opaque white - the white backing enhances the whiteness of the ivory. When CA glues old vory to old ivory, the color is old ivory. That's a shame about the old key tops, a lot of piano techs save them and use them to repair old pianos and keep things original.
The glue lines of laminated piano key tops are vertical, and would be similar to adding superglue to thicken up a saddle, as I have seen mentioned on this board. The strings would bear for the most part on the ivory surface, assuming your glue lines are reasonably thin.
I know these arguments won't convince many, so my suggestion to the O.P. would be to try the laminated ivory and see what you think. I don't think ivory is a unique or magical material,and any equally hard material that takes a fine polish, would probably work as well. One thing to be aware of if you do use it, is when crossing international borders it is liable to the same restrictions as any other undocumented cites listed material.
Reply With Quote
  #11  
Old 01-13-2011, 07:40 AM
stratokatsu's Avatar
stratokatsu stratokatsu is offline
Charter Member
 
Join Date: Jun 2002
Location: Miami, Florida
Posts: 8,513
Send a message via AIM to stratokatsu
Default

Even saddles made from somewhat exotic materials aren't THAT expensive. Would it really be worth the effort to go through laminating piano key covers together, then cutting them down, then shaping them into a saddle, then only to find maybe it doesn't sound as nice as you hoped?

I think a quick call to Bob Colosi, Visa card in hand, might be easier and certainly more confidence inspiring as far as knowing quality of what you'll get.
__________________
I play noisy wooden boxes with holes in the middle.
Reply With Quote
  #12  
Old 01-13-2011, 10:42 AM
kazzelectro kazzelectro is offline
Registered User
 
Join Date: Dec 2008
Posts: 262
Default

Would never order such a thing. As I mentioned I feel badly enough that this 90 year piano had ivory keys...but to buy them from a retailer is creating demand for the product. There's been many discussions on this topic and there are some that would and some and would not. Leave the elephants be!
Reply With Quote
  #13  
Old 01-13-2011, 11:13 AM
Wade Hampton Wade Hampton is offline
Registered User
 
Join Date: Sep 2008
Location: Chugiak, Alaska
Posts: 20,575
Default

I agree that we should leave the elephants (and walrus) alone. But old piano keys are not all that scarce.

The best use for old ivory piano keys that I've heard about (aside from them being used to repair other old ivory piano keys,) is for inlay. When used as an inlay material ivory doesn't have the iridescent qualities of pearl or abalone, but it can be a very elegant inlay material, nonetheless.


whm
Reply With Quote
  #14  
Old 02-07-2011, 07:48 AM
kazzelectro kazzelectro is offline
Registered User
 
Join Date: Dec 2008
Posts: 262
Default

Well, I will answer my own question. I laminated the ivory from the keys and made two saddles...one for a Gibson (mahogany) and the other for a Martin (rosewood)...and in both cases the ivory caused a loss of sustain and frequency. The lamination was tight and it looked as though it was a solid piece of ivory. I am not sure whether a solid piece of ivory would sound better...but my conclusion is that the laminated ivory saddles produced a negative effect on tone. Not recommended.
Reply With Quote
  #15  
Old 02-07-2011, 08:48 AM
1cubilindo 1cubilindo is offline
Registered User
 
Join Date: Mar 2009
Location: Clouds Hill
Posts: 1,221
Default

Quote:
Originally Posted by kazzelectro View Post
Bill..love the sentiment. I may just bury the whole lot. I've been hiding my guilt since I've acquire these keys.
Along those same lines, I think we should also bury our Brazilian Rosewood guitars as a show of solidarity!
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > General Acoustic Guitar Discussion

Thread Tools



All times are GMT -6. The time now is 06:53 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright ©2000 - 2017, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=