#1
|
|||
|
|||
Acoustic electric XLR output not working...
My AE has both 1/4" and XLR output.
1/4" works fine but XLR doesn't have any output using standard microphone xlr cable. The same cable works fine with a mic. Do I need different kind of xlr cable than the mic uses? thanks
__________________
Acoustic-Electric: Yamaha FGX800C, Jim Dandy. Seagull S6. Electric: Schecter C1+, Aria Pro II Fullerton. |
#2
|
|||
|
|||
Sometimes these dual output, XLR & 1/4" require a dummy plug in the 1/4" side. Try running the XLR cable with the 1/4" cable plugged into the guitar only.
|
#3
|
|||
|
|||
Does it need phantom power to run in xlr mode?
__________________
Axes: Schecter Raiden special 4 string e-bass Fender CD150S/12 string (fishman neo-d single coil) Paracho Bajo Quinto Gabbanelli solid body bajo quinto (M1A/DP156) Amps: VOX AGA150 Line 6 spider |
#4
|
|||
|
|||
Quote:
It works when I put a dummy 1/4" plug. What a mess! The whole point was so I could get a more secure connection with XLR that locks in than a loose 1/4" plug.
__________________
Acoustic-Electric: Yamaha FGX800C, Jim Dandy. Seagull S6. Electric: Schecter C1+, Aria Pro II Fullerton. |
#5
|
|||
|
|||
Probably the switch for the internal battery is on the jack plug. I know some ovations had this, and a secure fitting dummy plug was I think supplied with them.
|
#6
|
|||
|
|||
Quote:
I bought it used and didn't see a dummy plug. Anyway, I'm just couch player so not a big problem. Thanks
__________________
Acoustic-Electric: Yamaha FGX800C, Jim Dandy. Seagull S6. Electric: Schecter C1+, Aria Pro II Fullerton. |