|
|
#1
03-20-2018, 01:02 PM
|
|||
|
|||
Glue for HPL topped Martin bridge re-glue
I'm re-gluing a bridge on a HPL topped X series Martin. The top is HPL (some call it formica) and the bridge is Richlite. BTW I prefer to work on only the finest all solid wood guitars, but a guy's gotta make a living. Anyway... does anyone know what glue would have been used at the factory or an even better aftermarket glue? I was planning on Marine Epoxy, but thought I'd ask before gluing.
__________________
Larry Nair 
|
|
#2
03-20-2018, 02:02 PM
|
|||
|
|||
|
I posted a suggestion but just deleted it after reading the advice given to your same question posted on the UMGF.
__________________
Brucebubs 1972 - Takamine D-70 2014 - Alvarez ABT60 Baritone 2015 - Kittis RBJ-195 Jumbo 2012 - Dan Dubowski#61 2018 - Rickenbacker 4003 Fireglo 2020 - Gibson Custom Shop Historic 1957 SJ-200 2021 - Epiphone 'IBG' Hummingbird Last edited by Brucebubs; 03-20-2018 at 02:10 PM.
|
|
#3
03-20-2018, 06:40 PM
|
|||
|
|||
|
Not sure... but if it were me, I'd probably use medium CA glue.
|
