The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Reply
 
Thread Tools
  #1  
Old 07-22-2010, 08:37 AM
Ace of Spades Ace of Spades is offline
Registered User
 
Join Date: Nov 2009
Posts: 5
Default Making your own Purfling

Hello everyone! New to posting here (signed up late last year but life got in the way) but just became an official member. I am really excited about finding this place as I love playing the acoustic and I'm just getting into building for my personal interests. As with most forums I frequent, I am happy to say that the level of professionalism I have found here is quite satisfying. Thank you for allowing me to be a part of this!

Now, on to my question(s). Could some of you elaborate on some techniques in building your own custom purfling or know of some good resources that I might invest in? I have done some searching on the net but most information I find isn't conducive to assisting the beginner such as myself. The quality work I've seen here so far is amazing and my hat's off to all of you! Thanks again for this wonderful site and I hope to be able to contribute as well in other ways than just monetarily!
Reply With Quote
  #2  
Old 07-22-2010, 01:18 PM
Kitchen Guitars's Avatar
Kitchen Guitars Kitchen Guitars is offline
Formerly Yamaha Junkie
 
Join Date: Jun 2007
Location: South West Pennsylvania
Posts: 7,930
Default

Hi, Welcome
Guitarmaker magazine has had some neat articles on making your own Rosettes and purfling. You get the magazine though joining A.S.I.A
The Official Luthiers forum has posted some great examples. Their search engine can be tough.
Stew Mac and LMI sell the materials to do it. I am not sure if they have tutorials.
I have made binding with scrap wood a good caliper and a band saw.
Reply With Quote
  #3  
Old 07-22-2010, 04:12 PM
Ace of Spades Ace of Spades is offline
Registered User
 
Join Date: Nov 2009
Posts: 5
Default

Thanks, YJ! I checked out the Luthiers Forum and found some good stuff. I'll be checking into A.S.I.A. and the Guitarmakers Magazine too to see what I can find. You wouldn't by any chance know of a book anywhere would ya? I'll have to see if Barnes & Noble has any books on guitar making that might have a chapter on binding and purfling. Thanks again, Yamaha! Very much appreciated!!!

Last edited by Ace of Spades; 07-22-2010 at 11:32 PM.
Reply With Quote
  #4  
Old 07-23-2010, 05:16 AM
Kitchen Guitars's Avatar
Kitchen Guitars Kitchen Guitars is offline
Formerly Yamaha Junkie
 
Join Date: Jun 2007
Location: South West Pennsylvania
Posts: 7,930
Default

http://www.amazon.com/Guitarmaking-T...9883774&sr=1-7
This book covers all and then some.
Reply With Quote
  #5  
Old 07-26-2010, 11:36 AM
Ace of Spades Ace of Spades is offline
Registered User
 
Join Date: Nov 2009
Posts: 5
Default

Quote:
Originally Posted by Yamaha Junkie View Post
http://www.amazon.com/Guitarmaking-T...9883774&sr=1-7
This book covers all and then some.
Checked it out and I've got one on order as we speak! Thanks again!
Reply With Quote
  #6  
Old 08-03-2010, 06:40 PM
Kitchen Guitars's Avatar
Kitchen Guitars Kitchen Guitars is offline
Formerly Yamaha Junkie
 
Join Date: Jun 2007
Location: South West Pennsylvania
Posts: 7,930
Default

http://www.acousticguitarforum.com/f...d.php?t=190931
Check out his.
Reply With Quote
  #7  
Old 08-11-2010, 10:55 PM
Ace of Spades Ace of Spades is offline
Registered User
 
Join Date: Nov 2009
Posts: 5
Default

And thanks again once more, Yamaha!
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair






All times are GMT -6. The time now is 10:28 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=