#1
|
|||
|
|||
Sloane tuner upgrade fitting
I’m getting a new Martin crossover 0-28 nylon string. I have a brand new set of Sloan tuners and don’t like the idea of paying Martin 2 1/2 Times what they cost to buy. Especially when I have the same thing just sittin here... was wondering if anybody might know what cheap tuner Martin might sell that I could remove and put the Sloan’s on that the screw holes would match up with? I don’t mind putting a new screw hole in but don’t want the old hole to show. Filling it in never looks a good as having had the right one in to begin with. Thought somebody might have a little knowledge from putting Sloan’s on as an upgrade of something else.
Thanks |
#2
|
|||
|
|||
Contact Martin and ask them. From your description, it sounds like they offer the Sloane's as an option and should know the relative sizes and spacings of the tuning machines they offer.
|
#3
|
|||
|
|||
I had that idea too. They sell Sloans and they have the other ones right there so I did, but couldn’t get an answer out of em. I don’t think it’s an easy answer to actually come up with. Asked stew Mac also and they said they didn’t have the information either. I’m thinking about making a one to one size tracing with screw holes and sending it to Martin To see if that would work.
If I can’t find this out I’ll go with the gotoh’s and return the Sloans. But I’ve used Sloans and they feel and work really slick. Never used the gotoh’s and they may be good also. Just that they make several styles and I have no idea what Martin puts on. I have some pictures coming from them. Just don’t think I could live with myself paying over two times as much for something that I have sitting right here and anybody can buy brand new For the same price I paid. It’s not like they don’t put tuners on anyway. just don’t think I could live with paying over two times as much for something that I have sitting right here and anybody can buy brand new. It’s not like they’re doing something extra by putting Tuners on that they wouldn’t have to do anyway… I do understand its Martin Tho and there’s nothing I can do about it |
#4
|
|||
|
|||
Quote:
Just curious.
__________________
Best regards, Andre Golf is pretty simple. It's just not that easy. - Paul Azinger "It ain’t what you don’t know that gets you into trouble. It’s what you know for sure that just ain’t so." – Mark Twain http://www.youtube.com/user/Gitfiddlemann |
#5
|
|||
|
|||
Quote:
It is not difficult to determine if one brand is dimensionally interchangeable with another. On Stewmac's website, they provide dimensions for the Sloan tuners. http://www.stewmac.com/Hardware_and_...aseplates.html One need only compare the relevant dimensions to a similar drawing for the other options that are offered (e.g. from Martin). I have no doubt that similar drawings exist for each of the other options. That shouldn't take more than a few minutes. Neither company is willing to put in the effort to answer your relatively simple question. I'd take my business elsewhere for both. |
#6
|
|||
|
|||
Yes, it’s a Martin custom shop guitar. They only make one Standard nylon string and it’s not close to what I want. Taylor offers some but they’re smallest body has a bigger lower bout than I want, and when I tried to get info from Larrivée they just want to guide me towards their Normal classicals which isn’t what I want. Tried a guitar from another company and it got returned because of too many problems with it. I have other martins and like them, it’s just a little tough figuring out how to order. Might end up ordering an N20 which comes with Sloan’s, the neck I want with the right nut width, ebony fretboard and then paying an upchard to get a Radiused fretboard having it turned into a single 0 size.
I may even think hard on whether or not to go flat fretboard... not sure if they don’t really help me all that much or if I’m just equally bad with either one. |
#7
|
|||
|
|||
Quote:
That said, I'm not sure that I would be going down that road if it were me, i.e. the 0-28 body in a nylon string. That might have an unpredictable outcome tone wise. I'd personally feel a lot more comfortable with a custom steel order than nylon for that particular 0-28 size. I know what you mean about liking Martins, but build and top-bracing wise, it's challenging to transpose from steel to nylon. It might not be at all what you expect. With an N20, I would hesitate to mess with existing specs the way you're planning. Certainly not trying to discourage you! Just wanted to give you an opinion before you commit big funds for this type of custom order. As an alternative, you might want to consider standard crossover designs from other builders, ones that specialize in nylon string guitars. Cervantes comes to mind as an example. He has a Crossover I (radiused board, narrower neck) and Crossover II (flat board, classical width) in standard models which are likely much less money than a custom shop order. He uses quality materials (and tuners). Here is a Crossover I close-up: There are others. Just food for thought! There's no harm in broadening your search.
__________________
Best regards, Andre Golf is pretty simple. It's just not that easy. - Paul Azinger "It ain’t what you don’t know that gets you into trouble. It’s what you know for sure that just ain’t so." – Mark Twain http://www.youtube.com/user/Gitfiddlemann |
#8
|
|||
|
|||
Put this on another post but I guess not on this one…
I have a Credit at a store that I’d like to use on this. If I didn’t I probably look for vintage model. I have a Barberra pick up I’m going to put in. It’s a very sizable credit… ( ok... i’m sure people are going to be wondering, it’s $1500 ) I have choices of Martin, which I have two custom shop already and like them very muc. I realize Martin isn’t known for building the greatest classical guitars, but I’m not looking for a Classical. More of a folk or crossover. For my purposes I’m pretty confident that it would be fine. Also I could get a Taylor but I don’t like the lower bout size for what I wanted for. It’s big and I’m looking for and easy on the fingers nighttime couch guitar. Could get A Collins or a Kopp But I don’t think they make nylons. Cordova or Yamaha which I can’t get what I want from. Takamine tc135 would work but they don’t carry them . Unfortunately a lot of the ones that people recommend aren’t available to me if I want to use the credit. My biggest problem with Martin is trying to figure out how to order, and there’s always a matter of price. It almost seems like theyre wanting to punish me to order nylon. I had always heard that the 0-ny models sounded great if you ordered a nylon and that they had built a couple in Rosewood. I’m sure they’ve got this all figured out there’s no way I can win, but there’s a lot on the N20 model I want. Like I said, comes with Sloan, right size nut, I could get my MOD-V which I have thought another question shop Martin and I like. If I got it in mahogany would come with black binding which looks kind of nice if I got mahogany and not that much more if I jumped to Rosewood. Don’t disslike the sound of mahogany. 25.4 scale Then I could pay the upgrade to have it made in a 0 size or maybe even a New York if it’s not too planets away from what the original model is. Kind of thinking that changing the size is about 200 bucks but I could be wrong. Thought making this change would give me what I want. I’m afraid if I got a flat fretboard I’d always have trouble playing a barred F chord. |
#9
|
|||
|
|||
In addition to the screw holes, don't the Sloane's need a slightly larger barrel hole to accommodate the bearing?
I have a set of Sloane's on my custom flamenco and love them. Later Rob |
#10
|
|||
|
|||
If you're placing a custom order and you want to use the Sloane tuning machines you have in hand, can you just send them your tuners with the instructions to use them and not charge you for theirs? Seems to me that if you're dropping custom shop money, then they should accommodate this request.
|
#11
|
|||
|
|||
Smwink...
That’s a really good idea… I wish I could describe to you how hard they laughed when I asked em that question |
#12
|
|||
|
|||
So now I'm with Charles Tauber on this one. Why give your money to a company that is making this so difficult? Could you just sell your store credit to someone else and cash out?
|
#13
|
|||
|
|||
Yea, I know what you mean. they sure ain’t making it easy. Sometimes I think about taking up flutophone playing.
|
#14
|
|||
|
|||
Quote:
What you are asking them to do - having them use the tuners you send them - is rather like asking Ford to use on your next car the windshield you have in storage in your garage. If you want something - or some service - beyond what their factory lines accommodate, you're barking up the wrong tree. Ask the same question of a small luthier and you're likely to get a positive response: "Sure, I can do that". Different business model. Think about what havoc would result in a factory setting having individual customers send in parts they want used on their mass-produced objects. It isn't a question of "quality", mass-produced vs. one-off, it's a question of what demand each is in business to address and what services each offers to address that. |
#15
|
|||
|
|||
Yea, I realize that. I just thought if I could find the cheapest tuners they have that had a matching screw hole pattern that I could switch out myself since I already had
|