#16
|
||||
|
||||
Hi M-kid…
The main reason I see people do this is it's easier on their voice. |
#17
|
|||
|
|||
I mean, his guitar is tuned to standard pitch, a=440. He does not tune his guitar down.
|
#18
|
||||
|
||||
Quote:
Tommy has shared quite openly and frequently that he plays in standard tuning except for a couple of tunes in dropped D. |
#19
|
|||
|
|||
Whenever this question comes up with regard to playing ease, I always wonder, why not simply buy a lighter gauge?
|
#20
|
||||
|
||||
Quote:
Having the guitar professionally set up makes a difference too. Went over to a friend's house yesterday with my Voyage-Air VAOM-06 which the action is set very similar to my main guitars on, and he played it for a little bit and said "Man this plays so easy!" Same weight of strings as were on his Martin D-18. So I recommended he take it in for a professional setup which he admitted had not been done in over a decade. |
#21
|
|||
|
|||
Been tuning half-step down for years. Made the switch for easier singing but my strings rarely break now.
__________________
Buscarino Starlight nylon, Martin 000C-RGTE, Godin nylon duet ambiance, Breedlove Bossa Nova, cedar/EIR, Breedlove SC-20, cedar/walnut, Ovation Nylon LX1773, CA Cargo, CA GX, Larrivee 00-03, sitka/hog |
#22
|
|||
|
|||
I expect for most people, though, it's not just that reason, and the other reasons have to do with lowered pitch. And for those for whom it is the only reason, I wonder if the difference in tension from tuning down is noticeably more or less than it would be from going down in string gauge (and also whether there would be a loss of tone quality and/or volume from changing gauges). I guess if one wanted to experiment with their particular guitar, they can find out. But unless there's a reason they don't like the half-step in pitch change, it just seems easier to tune down.
|
#23
|
|||
|
|||
Quote:
I'm not arguing with that; I don't have any information either way about Tommy E. I'm merely making the point that standard tuning and a=440 are not necessarily the same. -Mike
__________________
For sale: Mint Condition Guild D125-12 All Mahogany 12 string 2009 Martin 000-18 Golden Era 1937 |
#24
|
|||
|
|||
I know all of Alice In Chains songs are 1/2 step down. I doubt it's because the guitar is "easier to play" for a guy like Jerry Cantrell.
Might surely be to accommodate singer's range. I just can't help but think the tension on neck and bridge is reduced and that such a 24/7/365 reduction in stress must be easier on entire guitar. |
#25
|
|||
|
|||
I tune down a step for the tone and because it makes it easier for me to sing in my old age. I have no idea, and really don't care, if it's easier on the strings.
__________________
Phil Playing guitar badly since 1964. Some Taylor guitars. Three Kala ukuleles (one on tour with the Box Tops). A 1937 A-style mandolin. |
#26
|
|||
|
|||
Quote:
|
#27
|
|||
|
|||
It could be ambiguous, but I meant that he tunes his a to 440 (110), as opposed to 415 (103) which would be down 1/2 step.
|
#28
|
|||
|
|||
Quote:
The neck is not an issue. The issue is the body, but especially the soundboard. Simply, lower tension on the strings (either by tuning down or using a lighter gauge) will slow the process of compression-caused deformation of the guitar's body. Usually, a neck reset has nothing to do with the neck itself. Rather, the body compresses and deforms in a common set of patterns based upon the bracing patterns used. Since the body itself deforms and the bridge position is different than original, the neck must be reset backwards to compensate. Some people prefer THICKER strings which are stiffer at any tension. Remember, tension, thickness, and stiffness are different elements. The response (attack/sustain) and sometimes tonal balance (how much overtones are in the notes) can change from lighter to heavier strings. Heavier strings tuned lower than standard is a nice option for mass in the strings but not extreme tension. It must be said, some guitars DO NOT handle 13's well at standard pitch, and will deform and sometimes even crack. MAKE CERTAIN your guitar can handle 13's if you intend to use them.
__________________
---- Ned Milburn NSDCC Master Artisan Dartmouth, Nova Scotia |
#29
|
|||
|
|||
Yup. I sat in the same room with Tommy for three days straight, and also attended a performance. He was in both standard tuning AND tuned at A=440 for all but a couple of the performance tunes the entire time.
__________________
-donh- *everything* is a tone control |
#30
|
|||
|
|||
Quote:
|