#16
|
|||
|
|||
Hi dreamincolor,
I use an Xotic EP Booster; very small footprint, high quality, doesn't mess with the tone, no "popping" etc., ...works great for me. http://www.xotic.us/effects/ep_booster/
__________________
Bill, Hong Kong. Gig videos - (acoustic) - (electric) ...me on the right, in black/cap. |
#17
|
|||
|
|||
Just thought of one other thing you might consider. This little pedal gets good reviews and is well made. Its the Behringer ADI21. Its an acoustic modeler, pre-amp DI box that can do exactly what you are looking for and also, maybe even enhance your tone. At $49 MSRP and usually found for $38 street, its a easy chance to take to see if it will work. It has been a Godsend in making my Taylor with the ES system come alive when going to a mixer/PA system.
http://www.behringer.com/EN/Products/ADI21.aspx
__________________
Brad Too many guitars, not enough talent.....YET! JUST THE ACOUSTICS- 2007 GA8e Taylor 2005 ESM-10e Fender Ensenada 2005 850t Carvin Cobalt Lots and Lots and Lots of Solid body Electrics |
#18
|
|||
|
|||
Gotta give it to the Baggs Venue. I previously used a Boss GE-7. The Venue may be pricey if all you are going to use it for is a boost. However, its well worth the $$$ because it has so many other features.
__________________
'97 Gibson J-60 '05 Taylor 410 '10 Silver Creek T-160 Rogue Spider Resonator Fishman Loudbox Mini L.R. Baggs Venue Kentucky KM-505 mando Hohner Special 20 harps |
#19
|
|||
|
|||
Quote:
I would be a little wary of 'suggestions' like the Baggs Venue or Radial (more like toots by people chuffed with personal purchases). They may be great pieces of gear in their own right, but overkill for your apparent needs, based on your limited description. If your budget is in the high dollar area, AND you see the need for a DI box, and need a tuner, then the Venue will cover that, but that's not what your post asks for. I think the Exotic boost pedal suggestion at least begins to embrace the question originally set by the OP. Although even there I see a small potential problem: its TINY, and may not be designed to be placed singularly on a stage floor, where it may easily capsize. I may be wrong, but something that small may be designed to sit on a pedalboard where it won't be kicked over. I think the whole clean boost pedal thing is a little overdone: a 6 - 12dB line level driver is hardly rocket science, and certainly not worth the Keeley, etc., asking prices. The venerable Boss EQ pedal is perfectly adequate, and gives you a bit of tone shaping to boot (quite literally). The heads up on the true-bypass switching noise was astute - in an acoustic setting, where thumps become even more of an issue, you may want to watch for that. Don't forget that if your guitar has on-board active volume, you can always learn to use that. Sound check with some soloing over the band with volume full up, and then turn down to rhythm level as a genearl setting. |
#20
|
|||
|
|||
I'm confused about something... Are you guys talking about an audible "pop" when using a true-bypass pedal or a regular pedal? I've used both and don't have that issue with either, not even my homemade TB effect loop pedals.
|
#21
|
|||
|
|||
Some pedals, true bypass and even buffered, will pop. It depends on a lot of variables but a good quality pedal will have been designed to eliminate the general causes of this popping sound due to applied voltage changes, LED circuits and the such. I only had one TB pedal that popped and it was exchanged by the manufacturer for one that did not. I have over 12 True Bypass pedals and none of them POP when engaged.
Some popping occurs when pedals are engaged during playing and that has to do with the circuitry also. A lot of the solutions to this are to engage it during a quiet passage or turn it on or off before you play. Anyway, I do not want to side-track this discussion. I believe the OP has a few good suggestions here and just needs to investigate what will work. OH, and as for the one pedal being too small and tipping. Never had that problem even with the smallest pedals. Once the plugs are in, even right angle, the stability is good.
__________________
Brad Too many guitars, not enough talent.....YET! JUST THE ACOUSTICS- 2007 GA8e Taylor 2005 ESM-10e Fender Ensenada 2005 850t Carvin Cobalt Lots and Lots and Lots of Solid body Electrics |
#22
|
|||
|
|||
FWIW, I've never had any pop problems with my GE-7.
Louis |
#23
|
|||
|
|||
Quote:
I've been amazed (and a bit overwhelmed) by the number of different suggestions in this thread. I tend to gravitate towards simplicity, so something that has less buttons/dials/switches would appeal to me. The Behringer pedal is very inexpensive - I was hoping to stay under $125 for this purchase. It appears there are several options within this price range (new and used). Thanks again to all for the numerous replies. I aim to do a bit of research and perhaps even get some "hands on" experience at a guitar shop or two before making a purchase. |
#24
|
|||
|
|||
Dreamincolor, where do you live in Virginia? PM me. If its close enough, I have several pedals you can borrow and see if they will do the job. I work in Winchester and Fairfax so if we can meet up. I would be more than willing to help you out in this decision. I have listed three below that will do what you want with the SD booster being the simplest.
Seymour Duncan Pickup booster (basic in/out, one knob, 6 to 25 db) Behringer ADI21 ( very good for going to a monitor and the mixer, warms up the tone, and with the level adj. can be used just as a boost.) Zoom Acoustic A2 ( lots of options, too many, however does not have a balanced output)
__________________
Brad Too many guitars, not enough talent.....YET! JUST THE ACOUSTICS- 2007 GA8e Taylor 2005 ESM-10e Fender Ensenada 2005 850t Carvin Cobalt Lots and Lots and Lots of Solid body Electrics |
#25
|
|||
|
|||
Brad - sent you an email!
|