#1
|
|||
|
|||
Feedback Killer Question for iRig Acoustic Stage Users
I recall hearing or reading somewhere that the Feedback Canceler in the little iRig Acoustic Stage preamp is applied to the entire blended signal when the user employs the preamp's Aux In to blend some pickup signal in with the mic signal. Can iRig Acoustic Stage Users confirm that this is true?
Will the preamp's feedback canceler work with the pickup signal alone if the blender is set for full pickup and there's no mic signal in the blend? Thanks in advance for any answers to these questions. |
#2
|
|||
|
|||
Hi, our developers have confirmed that Tone, Feedback Killer, Volume and Phase Switch are all on both AUX and the MEMS microphone on iRig Acoustic Stage. Hope that helps! Thank you.
|
#3
|
|||
|
|||
That's great news! Thanks for answering.
|