|
|
#1
04-01-2014, 12:48 PM
|
|||
|
|||
Luthiers/Techs & CF
The thread about setups and the N2 neck made me wonder, what experiences have y'all had when taking your CF guitar to a luthier or tech for setup work? Are they familiar with the instruments? Any reluctance to work on them? Any "oh, CF, cool!" eagerness to work on them?
|
|
#2
04-01-2014, 12:57 PM
|
|||
|
|||
|
I have taken my CF to one of the best shops in Akron and they loved to see it. They were coming out of the back room to play it. Never needed work done however. However setup work would be no different on a Rainsong vs my Wood guitars. I am usually going in with bigger wood issues.
__________________
Steve 2020 McKnight Grand Recording - Cedar Top 2005 McKnight SS Dred 2001 Michael Keller Koa Baby 2014 Godin Inuk 2012 Deering B6 Openback Banjo 2012 Emerald Acoustic Doubleneck 2012 Rainsong JM1000 Black Ice 2009 Wechter Pathmaker 9600 LTD 1982 Yairi D-87 Doubleneck 1987 Ovation Collectors 1993 Ovation Collectors 1967 J-45 Gibson 1974 20th Annivers. Les Paul Custom
|
|
#3
04-11-2014, 10:14 AM
|
|||
|
|||
|
I took my Emerald to a local G.C. to have the bridge sanded, with similar responses as Doubleneck had...People were coming out of the woodwork to both play and marvel at it!!!
I encourage everyone to take their Carbon Fiber to any guitar shop/ Luither or anywhere that guitar afficinatos meet...the look on faces is priceless!!! 
__________________
Current Acoustics: Emerald X-20 OS Opus Wechter Pathmaker Wechter Nashville Tuned Wechter Dobro Washburn Nylon Electric: Line 6 Variax Keyboards: Korg SV-1 88 key reverse PA: QSC K8 x 2 Amps: Custom Peavey Studio Pro (Superman) Fishman Loudbox Mini   
|
