|
|
Thread Tools |
#1
|
|||
|
|||
Larrivee Parlor PV-09e, Rainsong Parlor P12, Emerald X-10 12 string priced to sell
Trade considerations: National Resonator O, N, NRP, ResoRocket (steel, brass, nickel) or Journey OF660 collapsible gloss carbon fiber guitar. I would add cash for the right Resonator deal.
But, all offers welcome! All of the pictures are here: https://www.flickr.com/photos/484700...h/39228016651/ Rainsong S-PA1000NS 12 fret (Satin) with Fishman Electronics Price: $1,050 including ground shipping and PayPal. Soundboard: Carbon/Glass hybrid soundboard crafted using Projection Tuned Layering technique. No soundboard braces. Pinstripe rosette. Body: Carbon/Glass hybrid body. No body braces. Neck: 12-fret all-graphite NS neck and composite fingerboard fabricated using RainSongs Performance Shape Casting as a single piece. Adjustable truss rod. Accessories: Tusq™ Nut, saddle and bridgepins. Case: Hard shell case Finish: UV protective, Fine Texture™ finish. Depth at end-pin: 4.125 inches Lower bout: 13.34 inches Body Length: 18.78 inches Neck width at nut: 1.75 inches Scale length: 24.875 inches Tuning machines: Chrome plated Gotohs with 1:18 gear ratio Electronics: Fishman Prefix+T Overall Length: 37.78 inches Frets clear of body: 12 Larrivee PV-09e w/ LR Baggs iMix Electronics (The label doesn’t include the “e” but it is a factory installed pickup according to Larrivee) The guitar has 2 small dents on back about 1/8" x 1/8". One I could get a picture of and the other I never could - the second is about 2 inches higher than the one circled in the picture and neither looks as prominent in reality as in this picture. I took the guitar back in the house to try to get better pictures and I never could find both of them under indoor lights. The guitar is mint condition other than that. Beautiful to look at and sounds great, but I can't hang it on the wall like a carbon fiber guitar. Also, please note that I didn't realize the iMix pack had come loose from it's mooring, so I replaced the velcro and reattached to the inside back of the guitar. Price: $1,450 including ground shipping and PayPal. Back & Sides: Indian Rosewood Top: Sitka SPruce Neck: Mahogany Headplate: Ebony Fingerboard: Ebony Bridge: Ebony Tuners: "JCL" 18:1 Saddle: Bone • Compensated Nut: Bone Bridge Pins: Bone w/Black Dots Case: Hardshell Archtop Scale Length: 24” Upper Bout: 9.5” Waist: 7.75” Lower Bout: 13.25” Body Depth: 4” Nut Width: 1.75” Saddle Spacing: 2 7/32” Finish: Gloss Bracing Pattern: X-Brace Rosette: Abalone Top Purfling: Multi-Strip Body Binding: Maple Heel Cap: Maple Fingerboard Binding: Maple Bridge Style: Parlor Pick Guard: Tortoise Headstock: Inlaid Logo Fingerboard: Inlaid Dots Emerald X-10 12 string (B-spec) w/ B-Band electronics Here's what Alistair Hay (the creator of Emerald Guitars) says about the B-Spec models “These guitars all are perfect in terms of tone and playability, and are covered under the same guarantee as all the rest of our guitars. To differentiate from our standard guitars, b-spec models are all finished in a Satin black finish.” Price: $1,000 including ground shipping and PayPal. Back, Sides, Top, Neck, Fingerboard, Headplate, Bridge: all Carbon Fiber Case: Hardshell Archtop Scale Length: 25” Upper Bout: 11” Waist: 9” Lower Bout: 14.5” Overall Length: 39” Body Length: 17.5” Body Depth: 4” Nut Width: 1.75” Saddle Spacing: 2.25” Frets: 22 (16 to the body) Tuners: Spertzel Finish: Satin Here’s a live set with the Emerald 12 string: The Rainsong and the Larrivee were both purchased from Forum members and I've been buying and selling guitars through AGF for 12 years now without a hitch, so I would hope to continue that streak. I offer a 3 day inspection period and if you don't like the guitar for some reason, you can send it back and I will refund your money minus actual shipping cost. If you feel there was a gross misrepresentation on my part, then I will refund your money plus pay for return shipping. Last edited by mtlatham; 12-23-2017 at 01:36 PM. |